VALVE GP-MAIN CONTROL 4515888 - Caterpillar

Illustration 2 g00862309
Remove O-ring seal (3) and O-ring seal (4) from manifold (2) .
Illustration 3 g00862310
Remove eight bolts (5) and the washers from input bearing cage (6) .Note: Two bolts (5) can be used as forcing screws in order to loosen input bearing cage (6) .
Remove input bearing cage (6) from the transfer case assembly.
Illustration 4 g00862311
Illustration 5 g00512372
Typical Example
Remove O-ring seal (7) from the bearing cage.
Use Tooling (A) in order to remove bearing cup (8) from the bearing cage.
Illustration 6 g00862312
Remove lip seal (9) from input bearing cage (6) .
Illustration 7 g00862313
Remove input gear assembly (10) from the transfer case.
Illustration 8 g00862315
Illustration 9 g00862666
Use Tooling (B) in order to remove two bearing cones (11) from input gear assembly (10) .
Illustration 10 g00862316
Use Tooling (A) in order to remove bearing cup (12) .
Remove shim pack (13) from the transfer case assembly.
Illustration 11 g00862317
Turn over the transfer case assembly, as shown.
Remove eight bolts (14) from output bearing cage (15) .Note: Use two bolts (14) as forcing screws, if necessary.
Illustration 12 g00862319
Use Tooling (A) in order to remove bearing cup (16) from output bearing cage (15) .
Illustration 13 g00862320
Remove shim pack (17) and output gear assembly (18) from transfer case assembly.
Illustration 14 g00862321
Illustration 15 g00862687
Typical Example
Use Tooling (C) in order to remove two bearing cones (19) from output gear assembly (18) .
Illustration 16 g00862322
Remove tube (20) and dowel (21) from the transfer case assembly.
Use Tooling (A) in order to remove bearing cup (22) .