VALVE GP-CONTROL 4561801 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     3    Start By:
Remove the torque converter housing. Refer to Disassembly and Assembly, "Torque Converter Housing - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01845434
Remove seal rings (1). Remove bearing (2). Remove thrust bearing (3). Use Tooling (A) and a suitable lifting device in order to remove retarder (4). The weight of retarder (4) is approximately 40 kg (88 lb).
Illustration 2 g01846054
Remove seal (5) .
If necessary, remove studs (6) .