VALVE & MTG GP-BRAKE 4607618 - Caterpillar

Disassembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-1853     Retaining Ring Pliers     1    Start By:
Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove" .
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00471438
Put an alignment mark on the three casings of the turbocharger for correct alignment during assembly.
Loosen clamp (2) . Remove compressor housing (1) and clamp (2) from turbine housing (3) .
Illustration 2 g00471439
Loosen clamp (5) . Remove cartridge assembly (4) and clamp (5) from turbine housing (3) .