VALVE GP-SOL 4749387 - Caterpillar

Illustration 1 g01335378
Typical example
Note: Before assembly, lubricate the components with clean engine oil. (1) Tighten the setscrews for the housing of the rocker shaft to the following torque.C0.5 and C0.7 ... 10 N m (89 lb in) (2) Tighten the nuts for the housing of the rocker shaft to the following torque.C0.5 and C0.7 ... 10 N m (89 lb in) (3) Housing for the rocker shaft assembly
Illustration 2 g00819413 (4) Rocker shaftC0.5 and C0.7Diameter of the rocker shaft ... 9.95 to 9.968 mm (0.3917 inch to 0.3924)Service limit ... 9.87 mm (0.3886 inch) (5) Stud
Illustration 3 g00819419 (6) Tighten the locknut to the following torque. ... 14 N m (10 lb ft) (7) Adjustment screw for the rocker arm (8) Rocker arm (9) Rocker arm clearance on the rocker shaftC0.5 and C0.7Minimum permissible clearance ... 0.032 to 0.065 mm (0.00126 to 0.00260)Maximum permissible clearance (All models) ... 0.2 mm (0.008 inch)