VALVE AS-SOLENOID 4816936 - Caterpillar

Illustration 1 g03138026
Illustration 2 g03138029
View of section (A-A)
Table 1
3606 Engine 2W-5903 Fuel Injection Lines Gp Specifications    
Item     Qty     Part     Specification Description    
1     12     6V-8639 Connector    
105 10 N m (77 7 lb ft)    
2     24     268-1522 Connector    
3     2     6V-8625 Elbow    
4     1     9K-1242 Connector    
5     1     5T-2760 Spring     Length under test force...........................................
56 mm (2.20 inch)    
Test force.....................................................................
159 N (35.7 lb)
Free length after test..............................................
77 mm (3.03 inch)
Outside diameter....................................................
24 mm (0.95 inch)
6     1     3P-1156 O-Ring Seal     Lubricate seal lightly with clean diesel fuel    
7     1     4B-3611 Square Head Setscrew     Adjust bolt height to provide
550 50 kPa (80 7 psi) fuel pressure
Engine must be at rated load and speed    
Lubricate threads of setscrew (1) and bore of valve body after installation of the retainer and the seal.
Table 2
3608 Engine 2W-5906 Fuel Injection Lines Gp Specifications    
Item     Qty     Part     Specification Description    
1     16     6V-8639 Connector    
105 10 N m (77 7 lb ft)    
2     32     268-1522 Connector    
3     2     6V-8625 Elbow    
4     1     9K-1242 Connector    
5     1     5T-2760 Spring     Length under test force...........................................
56 mm (2.20 inch)    
Test force.....................................................................
159 N (35.7 lb)
Free length after test..............................................
77 mm (3.03 inch)
Outside diameter....................................................
24 mm (0.95 inch)
6     1     3P-1156 O-Ring Seal     Lubricate seal lightly with clean diesel fuel    
7     1     4B-3611 Square Head Setscrew     Adjust bolt height to provide
550 50 kPa (80 7 psi) fuel pressure
Engine must be at rated load and speed    
Lubricate threads of setscrew (1) and bore of valve body after installation of the retainer and the seal.