VALVE GP-LUBE DISTRIBUTION 4929946 - Caterpillar

Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03848725
Install bypass valve cover (15), bolts (14), and the O-ring seals.
Illustration 2 g03848719
Install cover (13), bolts (12), and the O-ring seal.
Illustration 3 g03847039
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install bypass valve (9), spring (10), cover (11), bolts (12), and the O-ring seals. Note: Bypass valve (9) must move freely in the bore.
Illustration 4 g03846879
Install housing support (7), bolts (8), and the O-ring seal. Tighten bolts (8) to a torque of 55 7 N m (41 5 lb ft).
Illustration 5 g03846854
Install filter housing (6), adapter (5), bolts (4), and the O-ring seal. Tighten bolts (4) to a torque of 55 7 N m (41 5 lb ft).
Lubricate the O-ring seals with the fluid that is being sealed.
Illustration 6 g03846822
Install engine oil filter elements (3).
Illustration 7 g03846799
Install cover (2), bolts (1), and the O-ring seals. If necessary, install the dowel into cover (2).
Lubricate the O-ring seals with the fluid that is being sealed. End By:
Install engine oil filter housing.