VALVE & LINES GP-HYD CONTROL 4E3309 - Caterpillar

Table 1
Required Part    
Item     Qty     Part Number     Description    
1     1     2S-9006     Shaft    
2     1     3H-0703     Dowel    
Illustration 1 g01225974
7W-1659 Tightener Arm Assembly (1) 2S-9006 Pulley Shaft (2) Existing 6.165 mm (0.243 inch)
Illustration 2 g01225977
7W-1659 Tightener Arm Assembly (3) Tapped hole
Seat the 2S-9006 Pulley Shaft (1) into the 7W-1659 Tightener Arm Assembly .
Use the existing 6.165 mm (0.243 inch) in order to drill a 6.165 mm (0.243 inch) hole in the 2S-9006 Pulley Shaft .
Insert the 3H-0703 Dowel into the hole (2) .
Use the existing tapped hole (3) in the bottom of the 7W-1658 Tightener Arm to drill a new hole. The new hole must have a diameter of 7 mm (0.276 inch) and the depth should be 30 mm (1.18 inch). This allows an intersecting passage for grease to enter the inner bore of the 2S-9006 Pulley Shaft .