4P9234 VALVE-CHECK Caterpillar parts
3116, 3126, 3126B, 3176B, 3176C, 3196, 3208, 3406B, 3406E, 3408B, 3412, 3412E, C15, D4E, M318, M320
Rating:
Alternative (cross code) number:
CA4P9234
4P-9234
4P9234
CA4P9234
4P-9234
4P9234
Weight: 0.03 pounds 0 kg.
INDUSTRIAL ENGINE, WHEELED EXCAVATOR,
This part in 2 request:
Show.
This information for suppliers only!
2022-05-31
2016-10-21
Compatible equipment models: 4P9234:
Number on catalog scheme:
10
For full view, you need register
Information:
Observe the safe working load limits of all lifting and blocking devices and keep a safe distance from suspended/blocked loads. Personnel may be seriously injured or killed by falling loads.
Required Parts
Table 1
Required Parts
Item Qty Parts
1 1 540-5078 Guardrail As
2 2 8T-3597 Weld Nut
3 1 343-8576 Plate
4 2 8T-4139 Bolt
5 2 7X-3392 Hard Washer
6 2 8T-4192 Bolt
7 2 5P-1076 Hard Washer Installation Procedure
Illustration 1 g06280031
(A) Platform Assembly
(D1) 16.75 mm (0.659 inch)
(1) 540-5078 Guardrail As
Use guardrail assembly (1) to locate and drill two holes of dimension (D1) for the middle post in platform assembly (A), as shown in Illustration 1.
Illustration 2 g06280037
(W1) Resistance welding
(2) 8T-3597 Weld Nut
(3) 343-8576 Plate
Weld two nuts (2) with plate (3), as shown in Illustration 2.Note: Weld as per 1E0376 Resistance welding specification.
Illustration 3 g06280060
(A) Platform Assembly
(2) 8T-3597 Weld Nut
(3) 343-8576 Plate
(4) 8T-4139 Bolt
(5) 7X-3392 Hard Washer
Locate and align the assembly of two nuts (2) and plate (3) to the drilled holes in platform assembly (A), and secure using two bolts (4) and two hard washers (5), as shown in Illustration 3.
Illustration 4 g06280063
(W2) Arc weld of 3 mm (0.1 inch)
(A) Platform Assembly
(2) 8T-3597 Weld Nut
(3) 343-8576 Plate
Weld the assembly of two nuts (2) and plate (3) to platform assembly (A), as shown in Illustration 4.Note: Weld as per 1E0099S arc welding specification.
Illustration 5 g06280102
(D2) 50 mm (2.0 inch)
(D3) 267 mm (10.5 inch)
(D4) 14 mm (0.6 inch)
(B) 399-3791 Guard
(1) 540-5078 Guardrail As
Locate two holes in toe-kick (B) by using guardrail assembly to mark the center of two holes, as shown in Illustration 5.Drill two holes per the dimensions, shown in Illustration 5.Note: After marking holes, remove the toe-kick and drill the holes.
Illustration 6 g06280113
(B) 399-3791 Guard
(6) 8T-4192 Bolt
(7) 5P-1076 Hard Washer
Reinstall toe-kick (B) and secure using two bolts (6) and two hard washers (7), as shown in Illustration 6.
Cat SIS web machinery list:
Parts valve Caterpillar catalog:
3412, 3412E, 69D, AD40, AD45, AE40, AE40 II, C30, C32
3412, 3412E, 69D, AD40, AD45, AE40, AE40 II, C30, C32
3176B, 3176C, 3196, C-10, C-12
3176B, 3176C, 3196, C-12, C12
3406, 3406B, 3406C, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 515, 525, 525B, 525C, 535B, 535C, 545, 545C, 583T, 587R, 587T, 623G, 627G, 627H,...
3406E, D350E II, D400E II, R2900
3406E, D350E II, D400E II, R2900
120B, 120G, 12G, 130G, 140B, 1673C, 1674, 1676, 1693, 215, 225, 235, 3160, 3176, 3176B, 3176C, 3196, 3208, 3304, 3306, 518, 627B, 637D, 910, 920, 930, 931B, 931C, 941, 950, 951B, 955K, 955L, 966C, 977...
215, 3204, 3208, 926, 953, D4HTSK II, E180, PR-1000
120B, 120G, 12G, 130G, 140B, 14G, 225, 3304, 3306, 528, 561C, 814, 920, 930, 941, 950, 951B, 955K, 955L, 966C, 977K, 977L, D4D, D4E, D5, D5B, D6C, D6D, D7F
120B, 12G, 3304, 3306, 561C, 920, 941, 951B, D4D, D4E, D5, D5B, D6C
M312, M313C, M315, M315C, M316C, M318, M318C, M318C MH, M320, M322C, M325C MH
6L9953
VALVE
3116, D336
3116, D336
3116, 3126
3116, 3126
3116, 3126
1013198
VALVE-INLET
3116
3116
3512, 3512B, 3516, 3516B, 3606, 3608, 3612, 3616, D399, G3512, G3516, G3516B, G3520B
0322118
VALVE AS
3116, 3126, 3126B
3116, 3126, 3126B
3116, 3126
3116, 3126
3114, 3116, 3126
3114, 3116, 3126, 3508, 3512B, 3516B, 815, 950, 966C, D346, D348, D349, D379, D379B, D398, D398B, D399, G3508, G3512, G3512E, G3516, G3516B, G3516C, G3516E, G3516H, G3520B, G3520C, G3520E, PMG3516
4P3954
VALVE-CHECK
3116
3116