VALVE GP-RELIEF 4T5572 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01444013
Remove bolts (10) and retainers (9).
Loosen hose clamps (1). Slide hose (2) onto tube (3).
Remove the bolts, clips (5), and the air lines group.
Loosen hose clamps (6). Remove hose (7) from tube (3) and tube assembly (8).
Remove the O-ring seals from tube assembly (8).
Remove nuts (4) and the bracket assembly, if necessary. Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3975 Rubber Lubricant -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01444013
Install the bracket assembly and nuts (4), if necessary.
Install the O-ring seals on tube assembly (8). Apply Tooling (A) to the O-ring seals.
Install hose (7) on tube (3) and tube assembly (8). Tighten hose clamps (6).
Install the air lines group, clips (5), and the bolts.
Slide hose (2) into position. Tighten hose clamps (1).
Install retainers (9) and bolts (10).