VALVE GP-RELIEF 4T9952 - Caterpillar

Introduction
The implement system configurations are programmed from the factory according to the machine shipping order. Many system parameters can be configured based on:
Operator/customer preferences
The addition of an attachment
Reinstallation of software or replacement of the Electronic Control Module (ECM)When changing certain configurations, a component calibration procedure may be required.Note: When flashing the Power Train ECM using the J1939 CAN communication system, the Power Train ECM will display as "Transmission". Select "Transmission" when flashing software to a new ECM that will be used as the Power Train ECM. Also, select "Transmission" when updating the software on an existing Power Train ECM.A new ECM can be delivered with the latest software and parameter defaults loaded.The following table lists the Power Train ECM configurations for the Power Train System.
Table 1
Power Train ECM Configuration    
Description    Value    
Transmission Configuration        
Transmission Maximum Forward Gear     4    
Transmission Maximum Reverse Gear     4    
Parking Brake Switch Engage Position Configuration     Pull    
Neutralizer Switch Installation Status     Installed    
Remote Operator Station ECM Installation Status     Installed    
Reverse Steering Installation Status     Installed    
Remote Control Operator Present System Engine Shutdown Enable     Enabled    
Operator Present System Engine Shutdown Enable     Enabled    
Backlight Percent     100%    
Security Access Parameters        
Total Tattletale     0