4T9953 VALVE GP-RELIEF Caterpillar parts
963
Rating:
Alternative (cross code) number:
CA4T9953
4T-9953
4T9953
CA4T9953
4T-9953
4T9953
Weight: 1 pounds 0 kg.
TRACK LOADER,
Compatible equipment models: 4T9953:
Number on catalog scheme:
None
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2 Start By:
Install the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "System Pressure - Release". Note: Cleanliness is an important factor. Before the removal procedure, thoroughly clean the exterior of the component. Thoroughly cleaning the exterior of the component will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all lines, on all hoses, on all wires and on all tubes for installation purposes. Plug all lines, all hoses, and all tubes in order to prevent fluid loss and contaminants from entering the system.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Drain the hydraulic tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the proper draining procedure.
Illustration 1 g01192155
Remove six bolts (2). Remove upper mounting (1).
Illustration 2 g01192156
Remove four bolts (4). Position manifold (3) out of the way.
Remove the O-ring seal from manifold (3).
Illustration 3 g01192159
Disconnect hose assembly (5).
Disconnect hose assembly (6).
Disconnect hose assembly (7).
Illustration 4 g03721507
Disconnect electrical connectors (9) and (10).
Remove the coupler and elbow (11).
Disconnect hose assembly (8).
Remove sensors (12) and (13).
Illustration 5 g03721509
Remove four bolts (15). Disconnect hose assembly (16).
Remove four bolts (17). Disconnect hose assembly (14).
Illustration 6 g03721508
Remove four bolts (19). Disconnect tube assembly (18).
Illustration 7 g03721511
Remove four nuts (21), the washers, and filler (20).
Illustration 8 g03721512
Install Tooling (A) and a suitable lifting device to hydraulic tank (22). The weight of hydraulic tank (22) is approximately 140 kg (308 lb).
Illustration 9 g03721513
Remove four bolts (23).
Remove hydraulic tank (22).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2 Start By:
Install the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "System Pressure - Release". Note: Cleanliness is an important factor. Before the removal procedure, thoroughly clean the exterior of the component. Thoroughly cleaning the exterior of the component will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all lines, on all hoses, on all wires and on all tubes for installation purposes. Plug all lines, all hoses, and all tubes in order to prevent fluid loss and contaminants from entering the system.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Drain the hydraulic tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the proper draining procedure.
Illustration 1 g01192155
Remove six bolts (2). Remove upper mounting (1).
Illustration 2 g01192156
Remove four bolts (4). Position manifold (3) out of the way.
Remove the O-ring seal from manifold (3).
Illustration 3 g01192159
Disconnect hose assembly (5).
Disconnect hose assembly (6).
Disconnect hose assembly (7).
Illustration 4 g03721507
Disconnect electrical connectors (9) and (10).
Remove the coupler and elbow (11).
Disconnect hose assembly (8).
Remove sensors (12) and (13).
Illustration 5 g03721509
Remove four bolts (15). Disconnect hose assembly (16).
Remove four bolts (17). Disconnect hose assembly (14).
Illustration 6 g03721508
Remove four bolts (19). Disconnect tube assembly (18).
Illustration 7 g03721511
Remove four nuts (21), the washers, and filler (20).
Illustration 8 g03721512
Install Tooling (A) and a suitable lifting device to hydraulic tank (22). The weight of hydraulic tank (22) is approximately 140 kg (308 lb).
Illustration 9 g03721513
Remove four bolts (23).
Remove hydraulic tank (22).
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
578, 583R, 589, 844, 844H, 844K, 854G, 854K, 963, 963B, 963C, 973, 973C, D10N, D10R, D10T, D11N, D11R, D11T, D8L, D9N
120G, 130G, 140G, 14G, 160G, 215, 215B, 215C, 225, 235, 235B, 330 L, 3304, 3304B, 3306, 3306B, 330B, 518, 528, 572G, 615, 637E, 815B, 936F, 950B, 950B/950E, 963, 966D, 966R, 973, 973C, D250B, D25C, D3...
120G, 130G, 14G, 1673C, 215, 225, 225D, 227, 229, 231D, 235, 3114, 3116, 3208, 3304, 3306, 3306B, 518, 528, 584, 613B, 815, 920, 924G, 924GZ, 924H, 924HZ, 924K, 928H, 928HZ, 930G, 930K, 938K, 941, 950...
120G, 12G, 130G, 140G, 14G, 1673C, 1693, 215, 215B, 225, 229, 235, 245, 3160, 3204, 3208, 330 L, 3304, 3306, 3306B, 330B, 3406, 3408, 3412, 3412C, 3516, 375, 515, 517, 518, 525, 527, 528, 54, 572G, 58...
1090, 1190, 1190T, 120, 120B, 120G, 120H, 120H ES, 120H NA, 1290T, 12F, 12G, 12H, 12H NA, 130G, 135H, 135H NA, 1390, 140, 140B, 140G, 140H, 140H NA, 143H, 14E, 14H, 16, 160H, 163H, 16G, 16H NA, 16M, 2...
1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 214B, 2...
120G, 12G, 130G, 140G, 14G, 16G, 227, 235, 245, 426, 428, 613B, 613C, 615, 615C, 621B, 621E, 623E, 627E, 631E, 637D, 637E, 65, 651E, 657E, 768C, 769C, 771C, 772B, 773B, 775B, 777, 785, 834B, 836, 931B...
120G, 12G, 130G, 140G, 14G, 229D, 3114, 3116, 3208, 3304, 561D, 627B, 637D, 933C, 939, 939C, 941, 951B, 955K, 955L, 963, 973, 977K, 977L, CB-434D, CB-534D, CB-564D, CD-54, CP-433E, CP-533E, CP-573E, C...
120, 120B, 12F, 140, 140B, 14E, 16, 16G, 245, 245B, 245D, 3304B, 3306, 5130, 5130B, 5230, 5230B, 561B, 561C, 572G, 578, 589, 594H, 613, 621, 621B, 621E, 621F, 621R, 623, 623E, 623F, 627, 627B, 627E, 6...
205B, 211B, 215, 215B, 225, 227, 229, 231D, 235, 235C, 235D, 245, 307, 311, 312, 315, 317, 318B, 320 L, 320B, 322 LN, 330 FM L, 330 L, 561B, 561C, 561M, 571G, 572G, 572R, 578, 583K, 594, 594H, 623B, 6...
1090, 1190, 1190T, 1290T, 1390, 205B, 211B, 215, 215B, 225, 227, 229, 2290, 231D, 235, 235C, 235D, 2390, 2391, 245, 2491, 2590, 307, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 C...
943, 953, 953B, 953C, 953D, 963, 963B, 963C, 963D, 973, 973C
4T2013
VALVE GP
963
963
9T0534
VALVE GP
963, 963B, 963C
963, 963B, 963C
3G3301
VALVE GP
963
963
9T8818
VALVE GP-STEERING
814B, 815B, 816B
814B, 815B, 816B
1175982
VALVE GP-SELECTOR & PRESS CONT
814B, 815B, 816B
814B, 815B, 816B