VALVE ASSEM. 4V1395 - Caterpillar

Product Identification Number (PIN)
Illustration 1 g03008816Machine PIN____________________Serial Number____________________Year of Manufacture (YOM)____________________
Illustration 2 g03008820Engine Information and Serial Number Plate____________________Certification
ROPS/FOPS Structure
This message is positioned on the ROPS on the left side of the machine above the door.
Illustration 3 g01212098
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. This will void the certification. Consult your Cat dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification film. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification film.Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information.European Union
Illustration 4 g01880193This plate is positioned on the bottom left side of the plate for the PIN.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.For machines compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power Primary Engine (kW)____________________
Engine Power for Additional Engine (If Equipped) ____________________
Typical Machine Operating Weight for European Market (kg)____________________
Year of Construction____________________
Machine Type ____________________
Illustration 5 g01120192This plate is positioned on the bottom left side of the plate for the PIN.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.For machines compliant to 1998/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power Primary Engine (kW)____________________
Typical Machine Operating Weight for European Market (kg)____________________
Year____________________For the name and address of the manufacturer, and the country of origin of the machine, refer to the PIN plate.For manufacturer name and address and the country of origin, see the PIN plate.Sound Certification
Illustration 6 g00933634
A typical example of this film is shown. Your machine may have a different value.
If equipped, the certification film is used to verify the environmental sound certification of the machine. The value that is listed on the film indicates the guaranteed sound power level. The guaranteed sound power level is measured at the time of manufacture. The guaranteed sound power level is measured according to the conditions that are specified in "ISO 6394:1998".Product Link
If equipped, this message is used to verify the certification of the Product Link as an RF transmitter. The following specifications are provided to aid in ensuring compliance with all local regulations:
Table 1
Operating frequency range 148 to 150 MHz
Transmitter power 5 W This message is located on the control group for the Product Link. The control group is located on the top of the cab.
Illustration 7 g01261742
This machine is equipped with a Caterpillar Product Link radio communication device which must be deactivated within 6.0 m (20 ft) of a blast zone. Failure to do so could result in serious injury or death.
If the machine is required