VALVE GP-REFUELING 5014186 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Pat Number Part Description Qty
A 185-3630 Strap Wrench As 1
B 276-7018 Plug/Cap Kit 1
C - Loctite 263 - Note: All high-pressure fuel line connections to be closed with protective caps from Tooling (B)
Turn the fuel supply to the OFF position and turn the power disconnect switch to the OFF position.
Illustration 1 g03838313
Use Tooling (A) to remove fuel filters (1).
Illustration 2 g03838317
Disconnect hose assembly (2) and hose assembly (3).
Illustration 3 g03838361
Remove bolts (4) and fuel filter base (5).
Illustration 4 g03838365
Remove shutoff valve (14), tee (11), adapter (10), and the O-ring seals.
Remove plug (6), plug (7), plug (8), plug (9), plug (12), and hollow studs (13).
Illustration 5 g03838417
Use Tooling (A) to remove fuel filters (16).
Remove adapter assembly (15) and disconnect hose assembly (17).
Illustration 6 g03838430
Remove bolts (18) and fuel filter base (19).
Illustration 7 g03838443
Remove check valve (28), shutoff valve (27), and elbow assembly (24).
Remove plug (20), plug (21), plug (22), plug (23), plug (25), and hollow studs (26).Installation Procedure
Install fuel filter base (19) and fuel filter base (5) in the reverse order of removal.
Apply Tooling (C) to the top 7.60 0.80 mm (0.299 0.031 inch) on the threads of hollow studs (13) and (26).
Tighten hollow studs (13) and (26) to a torque of 70 15 N m (52 11 lb ft).
Lubricate the seals of fuel filters (16) and (1) with the fluid that is being sealed.
Use Tooling (A) to tighten fuel filters (16) and (1). Tighten fuel filters (16) and (1) to a complete turn after seal contacts with the base.