VALVE GP-FUEL 5068199 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7574     Link Bracket     1    
B     138-7573     Link Bracket     2    
Illustration 1 g01082804
Attach Tooling (B) to differential assembly (15) .
Attach a suitable lifting device to Tooling (B) .
Use the suitable lifting device in order to install differential assembly (15). The weight of differential assembly (15) is approximately 159 kg (350 lb).
Install bolts (16) .
Illustration 2 g01082803
Install Tooling (A) to final drive and axle assembly (14) .
Attach a suitable lifting device to Tooling (A) .
Use the suitable lifting device in order to install final drive and axle assembly (14). The weight of final drive and axle assembly (14) is approximately 102 kg (225 lb).
Install the shims, cover (13), and bolts (12). Repeat for the other side.
Connect the tie rod.
Install nut (11) and cotter pin (10) .
Repeat Steps 5 through 10.
Use a suitable lifting device in order to position the front axle in a horizontal position.
Illustration 3 g01082789
Install ring (3), bearing (5), washer (6), plate (7), washers (8), and bolts (9) to front axle (4) .
Install bearing (2) and ring (1) .End By: Install the front axle. Refer to Disassembly and Assembly, "Drive and Steering Axle (Front) - Remove".