AVSPARE.COM
parts catalog

VALVE GP-BASIC 5089742 - Caterpillar



5089742 VALVE GP-BASIC Caterpillar parts VALVE
Rating:
66
Alternative (cross code) number:
CA5089742
508-9742
5089742
Caterpillar 5089742 VALVE GP-BASIC

Buy VALVE GP-BASIC 5089742 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g01524896
Place the stick into a vertical position. Position the boom onto Tooling (A) .
Release the system pressure. Refer to Disassembly and Assembly, "System Pressure - Release".
Illustration 2 g01524898
Remove clip (1). Position tube assembly (2) and hose assembly (3) to the side. Remove bolts (5). Position bracket (4), hose assembly (3), hose assemblies (6), and tube assembly (2) to the side. Repeat for the other side.
Illustration 3 g01251573
Illustration 4 g01524904
Place suitable cribbing (10) under stick cylinder (11). Use Tooling (B) in order to remove retaining ring (7). Remove shims (8). Remove pin (9) .
Retract stick cylinder (11). Install pin (9) and shims (8). Use Tooling (B) in order to install retaining ring (7). Attach a suitable lifting device to stick (12). The weight of stick (12) is approximately 230 kg (507 lb).
Remove pin assembly (13). Remove stick (12) and any shims (14) that may be present.Note: Note the location and the quantity of shims (14) for assembly purposes.
Illustration 5 g01259705
Illustration 6 g01251603
Use Tooling (B) in order to remove retaining ring (7). Remove shims (8) and pin (9). Use Tooling (C) in order to remove bearing (15) and bearing (16) (not shown).Installation Procedure
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     8S-7615     Pin     1    
8S-7641 Stand     1    
8S-7631 Tube     1    
B     5P-5197     Retaining Ring Pliers     1    
D     1P-0520     Driver Gp     1    
Illustration 7 g01259705
Lower the temperature of bearings (15) and (16). Use Tooling (C) in order to install bearings (15) and (16). Install pin (9) and shims (8). Use Tooling (B) in order to install retaining ring (7) .
Illustration 8 g01524904
Illustration 9 g01251573
Attach a suitable lifting device to stick (12). The weight of stick (12) is approximately 230 kg (507 lb). Install stick (12) and any shims (14) that were present during the removal procedure. Install pin assembly (13). Install shims (14). Use Tooling (B) in order to remove retaining ring (7). Remove pin (9) and shims (8).
Extend stick cylinder (11). Install pin (9). Install shims (8). Use Tooling (B) in order to install retaining ring (7). Remove suitable cribbing (10) from stick cylinder (11).
Illustration 10 g01524898
Position tube assembly (2) and hose assembly (3) to the side. Position bracket (4), hose assembly (3), hose assemblies (6), and tube assembly (2). Install bolts (5). Install clip (1). Repeat for the other side.End By: Install the extendable stick cylinder. Refer to Disassembly and Assembly, "Extendable Stick Cylinder - Remove and Install".


Parts valve Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.