VALVE AS 5104161 - Caterpillar

21 - Auxiliary electrical control “AUX6(C1)”
22 - Auxiliary electrical control “AUX5(C2)”
23 - Solenoid for secondary auxiliary electrical control “(C+)”
24 - Solenoid for secondary auxiliary electrical control “(C−)”
25 - Auxiliary electrical control “AUX7”
26 - Stop lamp
27 - Backup alarm
28 - Fuel shutoff
29 - Self-level and ride control
30 - Hydraulic flow controlMain Fuse
The main fuse is a 105 amp fuse. The fuse is located behind the battery in the engine compartment on the left side of the machine. Disconnect the negative battery cable before you replace this fuse.Fuse panel behind cab
There is an additional fuse panel behind the cab on the right side of the machine.
Illustration 4 g03317143
(A) First pair
(B) Second pair
(C) Third pair This panel has a total of seven fuses. In order to change these fuses, push up on the locking tab on the fuse cover. Pull the cover away from the back of the cab.
Illustration 5 g03316744
Implement control (31) - 30 Amp
Component not used (32) - 20 Amp
Horn (33) - 20 Amp
Main power relay 1 (34) - 60 Amp
Miscellaneous cab accessories (305) - 20 Amp
Main power relay 2 (36) - 60 Amp
Ignition switch (37) - 15A