VALVE & MTG GP-MAIN CONTROL 5169267 - Caterpillar

1. Remove bolt (2) holding hose clip (3) in place.2. Remove eleven bolts (1) holding oil filter base (4) to oil cooler (5) and cylinder block (6).3. Remove oil filter base (4).4. Remove the four O-ring seals from oil filter base (4). For installation of the oil filter base, reverse the removal steps.End By:a. install oil filters6. Check the engine oil for the correct level. See the Operation & Maintenance Manual.Disassemble & Assemble Oil Filter Base
Start By:a. remove oil filter baseFLUID SPILLAGE CONTAINMENT Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to "TOOLS AND SHOP PRODUCT GUIDE, NENG2500", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations and mandates. 1. Remove four O-ring seals (1) from oil filter base (2).
There is a small amount of spring force behind cover (4). When two bolts (3) are loosened, the spring force will be released. To prevent possible personal injury, loosen bolts (3) slowly and evenly to release the spring force.
2. Remove two bolts (3) slowly and evenly to release the spring force behind cover (4).3. Remove cover (4). 4. Remove two springs (5) from oil filter base (2). 5. Remove two plungers (6) from oil filter base (2).6. Remove two plugs (7) from oil filter base (2). For assembly of the oil filter base, reverse the disassembly steps.End By:a. install oil filter base