VALVE GP-CONTROL 5260684 - Caterpillar

5260684 VALVE GP-CONTROL Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5260684
526-0684
5260684

Weight: 10 pounds 4 kg.

Buy VALVE GP-CONTROL 5260684 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 2

Caterpillar 5260684 Parts scheme VALVE GP-CONTROL

For full view, you need register

Information:

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Level 1 results may indicate a need for Level 2 Analysis.Obtain the sample of the coolant as close as possible to the recommended sampling interval. In order to receive the full effect of S O S analysis, establish a consistent trend of data. In order to establish a pertinent history of data, perform consistent samplings that are evenly spaced. Supplies for collecting samples can be obtained from your Caterpillar dealer.Use the following guidelines for proper sampling of the coolant:
Complete the information on the label for the sampling bottle before you begin to take the samples.
Keep the unused sampling bottles stored in plastic bags.
Obtain coolant samples directly from the coolant sample port. You should not obtain the samples from any other location.
Keep the lids on empty sampling bottles until you are ready to collect the sample.
Place the sample in the mailing tube immediately after obtaining the sample in order to avoid contamination.
Never collect samples from expansion bottles.
Never collect samples from the drain for a system.
Illustration 1 g03379586
Coolant sampling port
Open the engine access door on the left-hand side of the machine.
Remove the cap from the coolant sampling port.
Collect the coolant sample.
Install the cap on the coolant sampling port.
Close the engine access door.
Submit the sample for level 2 analysis. For additional information about coolant analysis, see Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" or consult your Caterpillar dealer.