AVSPARE.COM
parts catalog

VALVE-DASH 5385556 - Caterpillar


5385556 VALVE-DASH Caterpillar parts
Rating:
11
Alternative (cross code) number:
CA5385556
538-5556
5385556
Caterpillar 5385556 VALVE-DASH
Weight: 1 pounds 0 kg.

Buy VALVE-DASH 5385556 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 5 g01386388
Remove bolts (13), plate (14), and pin assembly (12). Remove ripper lift cylinder (6) from the machine. The weight of ripper lift cylinder (6) is approximately 454 kg (1000 lb).Disassembly and Assembly Information
Table 2
Required Tools
Tool Part Number Part Description Qty
B 127-4904 Hydraulic Cylinder Repair Stand Gp 1
1P-1833 Adapter 1
4C-9633 Puller Stud 1
6V-3160 Double Acting Cylinder 1
9U-6833 Nut 1
9U-7217 Sleeve 1
3S-6224 Electric Hydraulic Pump Gp 1
195-4609 Seal Pick 1
C 7M-7456 Bearing Mount Compound -
D 1P-0808 Multipurpose Grease -
F 134-9804 Seal Guide 1
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Illustration 6 g01386824 (1) Apply Tooling (D) to the threads and tighten the nut to a torque of 8000 800 N m (5900 590 lb ft). (2) Tighten the piston to a torque of 700 70 N m (516 52 lb ft). (3) Lubricate the seals with the lubricant that is being sealed. (4) Apply Tooling (C) to the seal groove prior to assembly.Installation Procedure
Table 3
Required Tools
Tool Part Number Part Description Qty
E 9S-5562 Pin Driver Cap 1
Illustration 7 g01386388
Illustration 8 g01386808
Attach a suitable lifting device to each end of ripper lift cylinder (6). Position ripper lift cylinder (6) to the machine. The weight of ripper lift cylinder (6) is approximately 454 kg (1000 lb). Install pin assembly (12), plate (14), and bolts (13).
Lower ripper lift cylinder (6).
Use Tooling (E) (not shown) to drive pin assembly (8) in ripper frame assembly (7) and through ripper lift cylinder (6) and spacer (11).
Install plate (9) and bolts (10) that hold pin assembly (8) to ripper frame assembly (7).
Illustration 9 g01386380
Connect hose assemblies (4) and (5) to ripper lift cylinder (6).
Illustration 10 g01386767
If equipped, install bolts (1) that hold the fast fill fuel adapter (2) to bracket (3).End By:
Install the ripper tilt cylinder. Refer to Disassembly and Assembly, "Tilt Cylinder (Ripper) - Remove and Install".


Parts valve Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.