VALVE GP-SOLENOID 5388794 - Caterpillar

1. Remove fourteen bolts (1), two guards (2) and plate (3). 2. Remove nut (4). 3. Loosen four bolts (5). 4. Remove two cotter pins (6), side plate (7) and master link (8). 5. Remove pipe (9), four bolts (5) and remove auger planetary. 6. Remove retaining ring (10), washer (11) and loosen two set-screws (12).7. Remove sprocket (13) and key (14). 8. Remove four bolts (15) and remove support assembly (16). For installation, reverse removal steps.End By:Install auger motor.Disassemble & Assemble Auger Planetary
1. Remove twelve bolts (1) and remove cover (2). 2. Remove O-ring (3) and shim (4). 3. Remove ring gear (5), washer (6), carrier (7) and input gear (8). 4. Remove O-ring (9), washer (10) and ring gear (11). 5. Remove retaining ring (12) and washer (13). 6. Remove seal (14), shaft (15), bearing (16) and bearing cup (17). Bearing (16) is press-fit onto shaft (15). 7. Remove bearing (18) and bearing cup (19). Bearing (18) is press-fit onto shaft (15). 8. Remove pin (20), shaft (21), thrust washers (22), gear (23), needle bearing (24) and spacer (25).9. Repeat step 8 to remove remaining planetary gears. For assembly, reverse the disassembly steps. All planetary components must be cleaned and inspected before assembly. If any components are worn beyond recommended limits they must be replaced. Lubricate all moving components during assembly. Assemble planetary with all new seals.