VALVE 5470825 - Caterpillar

Removal Procedure
Start By:
Remove the work tool.
Illustration 1 g03854242
Type 1
Illustration 2 g06261873
Type 2
Position work tool (1) in the upright position, when possible. Only position the work tool on a solid, level surface. Refer to the illustration 1 and illustration 2. If a flat, level surface is not available, then position the work tool on one side.
Illustration 3 g03854282
Type 1
Illustration 4 g06261874
Type 2
Attach a suitable lifting device to mounting bracket (2). The weight of mounting bracket (2) is approximately 190 kg (419 lb).
Remove bolts (3) and mounting bracket (2).Installation Procedure
Install mounting bracket (2) in the reverse order of removal.
Tighten bolts (3) to a torque of 270 40 N m (199 30 lb ft).