VALVE GP-BRAKE CONTROL 5555494 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     2    Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" .Note: Use the following procedure for the removal of the fender from both sides of the machine.
Illustration 1 g01083632
Install Tooling (A) and a suitable lifting device to rear fender (1), as shown.
Illustration 2 g01083633
Remove bolts (2) and the washers.
Illustration 3 g01083639
Remove bolts (3), the washers, and the plate. Remove bolts (4). Remove fender (1) .Installation Procedure
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     2    
Illustration 4 g01083632
Illustration 5 g01083639
Install Tooling (A) and a suitable lifting device to rear fender (1), as shown. Install fender (1). Install bolts (3), the washers, and the plate. Install bolts (4).
Illustration 6 g01083633
Install bolts (2) and the washers.
Remove Tooling (A) .End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.