VALVE GP-QUICK DROP 5J4845 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-5592 Anti-Seize Compound -
185-3989(1) Thread Lubricant -
(1) For use in EAME
Illustration 1 g03119478
Remove belt (1) from pulley (2). Refer to Operation and Maintenance Manual, "Alternator Belt - Inspect/Adjust/Replace".
Remove nuts (3) and pulley (2).
Slide vibration damper (5) along studs (4). Attach a suitable lifting device to vibration damper (5). The weight of vibration damper (5) is approximately 50 kg (110 lb). Remove vibration damper (5) from studs (4).
Remove studs (4), if necessary.
Attach a suitable lifting device to damper adapter (6), if necessary. The weight of damper adapter (6) is approximately 23 kg (50 lb). Remove bolts (7) and damper adapter (6). Installation Procedure
Thoroughly inspect the viscous damper for signs of leakage or for signs of a dented (damaged) case. Either of these conditions can cause the weight to make contact with the case. This can affect the viscous damper's operation.
Install vibration damper (5) in the reverse order of removal.
Apply Tooling (A) to bolts (7).
Tighten studs (4) to a torque of 65 10 N m (48 7 lb ft).
Tighten nuts (3) to a torque of 135 20 N m (100 15 lb ft).