VALVE G. 5J9702 - Caterpillar

Work tool open and close speed can be decreased by lowering the following parameter value.
Spool shift pressure adjustment to extend the attachment control valve."Atch #X Max Ext Press" (Parameter #30 and #40) - XXXX [kPa]
Spool shift pressure adjustment to retract the attachment control valve for two-way flow only."Atch #X Max Ret Press" (Parameter #31 and #41) - XXXX [kPa]Note: For reference, this parameter is set within the range of 800 kPa to 2000 kPa.Two Pump Flow
Set the appropriate flow for the work tool to be installed by using the following parameter settings."Atch #1 Flow Setting" (Parameter # 27) - XXX [L/min]
Table 2
Maximum Flow Setting for Two Pump Flow
340F UHD 578 L/min (152.7 US gpm)
Work tool open and close speed can be decreased by lowering the following parameter value.
Spool shift pressure adjustment to extend the attachment control valves."Atch #1 Max Ext Press" (Parameter #30) - XXXX [kPa]"Atch #2 Max Ext Press" (Parameter #40) - XXXX [kPa]
Spool shift pressure adjustment to retract the attachment control valves for two-way flow only."Atch #1 Max Ret Press" (Parameter #31) - XXXX [kPa]"Atch #2 Max Ret Press" (Parameter #41) - XXXX [kPa]Note: For reference, this parameter is set within the range of 800 kPa to 2000