5N5756 VALVE GROUP DIVERTER 1-6 (D) Caterpillar parts
D379, D398, D399
Rating:
Alternative (cross code) number:
CA5N5756
5N-5756
5N5756
CA5N5756
5N-5756
5N5756
Weight: 1 pounds 0 kg.
INDUSTRIAL ENGINE,
This part in 2 request:
Show.
This information for suppliers only!
2019-08-15
2019-07-30
For full view, you need register
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1854 Retaining Ring Pliers 1
B - Plate
51.0 by 102.0 by 6.0 mm (2.00 by 4.00 by 0.25 inches) 2
C 1P-1857 Retaining Ring Pliers 1
D - Allen Wrench (5/16 inch) 1 Start By:
Remove the air starting motor. Refer to Disassembly and Assembly, "Air Starting Motor - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Ensure that there is a complete set of new gaskets, vanes, seals, and O-ring seals before the air starting motor is disassembled.Note: The illustrations that follow show a different orientation of the components from the air starting motor that was removed from the engine. Use the procedures that are given. Maintain the alignment of the components of the air starting motor.
Illustration 1 g00538952
Remove elbow (1) and the gasket from cover assembly (2).
Illustration 2 g00538959
Remove silencer (4) and the gasket from motor housing (3).
Illustration 3 g00538960
Mark the housing in order to show the position of motor housing (3) in relation to gear case (7) for assembly. Remove bolts (5) in order to remove gear case (7) and drive housing (6) as a unit from motor housing (3).
Illustration 4 g00538961
Use Tooling (A) in order to remove ring (9) from drive gear (8).
Illustration 5 g00538963
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Note: Air starting motors for standard engine rotation rotate clockwise when the motors are viewed from the pinion end of the starting motor. Bolt (10) for a clockwise rotation starting motor has left hand threads.Note: Air starting motors for reverse engine rotation rotate counterclockwise when the motors are viewed from the pinion end of the starting motor. Bolt (10) for a counterclockwise rotation starting motor has right hand threads.
Remove bolt (10) and washer (11) in order to remove drive pinion (12), the sleeve, and the spring from the end of
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1854 Retaining Ring Pliers 1
B - Plate
51.0 by 102.0 by 6.0 mm (2.00 by 4.00 by 0.25 inches) 2
C 1P-1857 Retaining Ring Pliers 1
D - Allen Wrench (5/16 inch) 1 Start By:
Remove the air starting motor. Refer to Disassembly and Assembly, "Air Starting Motor - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Ensure that there is a complete set of new gaskets, vanes, seals, and O-ring seals before the air starting motor is disassembled.Note: The illustrations that follow show a different orientation of the components from the air starting motor that was removed from the engine. Use the procedures that are given. Maintain the alignment of the components of the air starting motor.
Illustration 1 g00538952
Remove elbow (1) and the gasket from cover assembly (2).
Illustration 2 g00538959
Remove silencer (4) and the gasket from motor housing (3).
Illustration 3 g00538960
Mark the housing in order to show the position of motor housing (3) in relation to gear case (7) for assembly. Remove bolts (5) in order to remove gear case (7) and drive housing (6) as a unit from motor housing (3).
Illustration 4 g00538961
Use Tooling (A) in order to remove ring (9) from drive gear (8).
Illustration 5 g00538963
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Note: Air starting motors for standard engine rotation rotate clockwise when the motors are viewed from the pinion end of the starting motor. Bolt (10) for a clockwise rotation starting motor has left hand threads.Note: Air starting motors for reverse engine rotation rotate counterclockwise when the motors are viewed from the pinion end of the starting motor. Bolt (10) for a counterclockwise rotation starting motor has right hand threads.
Remove bolt (10) and washer (11) in order to remove drive pinion (12), the sleeve, and the spring from the end of
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
120G, 12G, 130G, 140G, 14G, 14H, 14H NA, 160G, 16G, 16H, 16H NA, 613, 613C, 613C II, 621, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 631C, 631D, 631E, 631G, 633C, 633D, 633E II, 637, 637D, ...
3508, 3508C, 3512, 3512B, 3512C, 3516, 3516B, D379B, D398, D399
1N9924
VALVE AS-CHECK
D379, D379A, D379B, D398, D398A, D398B, D399, G399
D379, D379A, D379B, D398, D398A, D398B, D399, G399
3412, 3412C, 3412D, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, 5230, 5230B, 776, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 789, 789B, 78...
3508, 3508B, 3508C, 3512, 3516, 3516B, 5130, 5230, 594, 776C, 784B, 785, 785B, 789B, 793B, 994, D11N, D11R, D326F, D337, D337F, D353C, D379, D379A, D379B, D398, D398A, D398B, D399, D9E, D9G, D9H, G350...
120B, 120G, 12G, 130G, 140B, 1673C, 1674, 1676, 1693, 215, 225, 235, 3160, 3176, 3176B, 3176C, 3196, 3208, 3304, 3306, 518, 627B, 637D, 910, 920, 930, 931B, 931C, 941, 950, 951B, 955K, 955L, 966C, 977...
594, D353C, D379, D379A, D379B, D398, D398A, D398B, D399, D9G, D9H, G353D, G379, G398, G399
7L5969
VALVE
D399
D399
D346, D348, D349, D379, D379A, D379B, D398, D398B, D399
D353C, D379, D398, D9G, D9H
D379A, D379B, D399
D379, D399
7W3593
VALVE ASSEMBLY
G379, G398, G399
G379, G398, G399
2R6876
VALVE 3 WAY COMMON PORT TO FORWARD VENT TRAP NIPPLE
D379, D379B, D398, D398B, D399
D379, D379B, D398, D398B, D399
3986226
VALVE
323D2 L, 535D, 545D, 924K, 930K, 938K, 950 GC, C7.1, D6K2
323D2 L, 535D, 545D, 924K, 930K, 938K, 950 GC, C7.1, D6K2
323D2 L, 535D, 545D, 924K, 930K, 938K, 950 GC, C7.1, D6K2
5S5323
VALVE (Exhaust)
G353D, G379, G398, G399
G353D, G379, G398, G399
777, 992, D349
D379, D399