5P8949 VALVE GRINDING COMPLETE Caterpillar parts
594H, D9H
Rating:
Alternative (cross code) number:
CA5P8949
5P-8949
5P8949
CA5P8949
5P-8949
5P8949
Weight: 5 pounds 2 kg.
PIPELAYER, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$219.00
04 Oct 2022
CN: kangpinyouxuan
Head Gasket Set 1276974 5P8949 for Caterpillar 594H D9H
N\\C Part Number: 1276974, 5P8949 || Applicable Models: for Caterpillar 594H D9H || Warranty: 1 Year. || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible. || Delivery Time: We will ship the item to you by DHL/FedEx/USPS, which will arrive in 5-9 days once we ship it to you. The delivery time will not a month like which shown online, you could buy with confidence!
N\\C Part Number: 1276974, 5P8949 || Applicable Models: for Caterpillar 594H D9H || Warranty: 1 Year. || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible. || Delivery Time: We will ship the item to you by DHL/FedEx/USPS, which will arrive in 5-9 days once we ship it to you. The delivery time will not a month like which shown online, you could buy with confidence!
$138.09
15 May 2022
US: TakePart
Head Gasket Set 1276974 5P8949 for Caterpillar 594H D9H
N\\C Part Number: 1276974, 5P8949 || Applicable Models: for Caterpillar 594H D9H || Warranty: 1 Year. || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible. || Delivery Time: We will ship the item to you by DHL/FedEx/USPS, which will arrive in 5-9 days once we ship it to you. The delivery time will not a month like which shown online, you could buy with confidence!
N\\C Part Number: 1276974, 5P8949 || Applicable Models: for Caterpillar 594H D9H || Warranty: 1 Year. || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible. || Delivery Time: We will ship the item to you by DHL/FedEx/USPS, which will arrive in 5-9 days once we ship it to you. The delivery time will not a month like which shown online, you could buy with confidence!
$139.62
11 May 2022
8.0[3.60] Pounds
US: ProperBuy
1276974 Gasket Kit Fits Caterpillar 5P8949 594H D9H
TCP Warranty
TCP Warranty
For full view, you need register
Information:
Conditions Which Generate This Code:
Illustration 1 g01379300
Schematic of the speed sensor for the front wheel driveThis diagnostic trouble code is associated with the speed sensor for the front wheel drive. This diagnostic trouble code is recorded when the ECU reads the signal from the sensor and the ECU determines that the signal is erratic, intermittent, or incorrect.The possible causes of this diagnostic trouble code are listed:
Wire (X963-GY) is shorted to the ground circuit while the machine is in operation.
Wire (X962-WH) is shorted to the +battery.
An open circuit exists.
The ECU has failed. This is unlikely.Note: The following test procedure may create other diagnostic trouble codes. Ignore these created diagnostic trouble codes and clear the diagnostic trouble codes when the original diagnostic trouble code has been corrected. Ensure that the diagnostic trouble code of CID 3000 FMI 02 is active before performing this procedure.Note: Use a digital multimeter for the measurements in this procedure.Test Step 1. VERIFY THE SOFTWARE VERSION.Note: From SIS or the latest release of the CD for SIS, check and record the latest software version for the machine electronic controls.
Verify that the Transmission ECU has the most current version of software.
Verify that the ECU has the latest version of software.Expected Result:All of the software is current.Results:
OK - All of the software is current. Proceed to Test Step 2.
NOT OK - A recent version of software is available.Repair: Flash all controls with the latest software release. Refer to Testing and Adjusting, "Electronic Control Unit - Flash Program".STOPTest Step 2. CHECK THE HARNESS.
Turn the key start switch to the OFF position.
Inspect the harness.
Check for the proper mating.
Check the exposed wires for nicks and abrasions.
Check for moisture, dirt, or corrosion.
Check the pin/socket for a proper fit.
Disconnect the machine harness connectors from the Transmission ECU.
At the machine harness connector, measure the resistance from connector contact J1-15 (wire X962-WH) and J1-16 (wire X963-GY) to all of the contacts in the J1 and J2 machine harness connectors. Expected Result:The resistance should be less than 5 ohms.Results:
OK - The resistance is less than 5 ohms. The machine harness is correct. Proceed to test step 3.
NOT OK - The resistance is greater than 5 ohms. There is an open in the machine harness. The open is in wire X962-WH or in wire X963-GY.Repair: Repair the machine harness or replace the machine harness.STOPTest Step 3. CHECK IF THE DIAGNOSTIC TROUBLE CODE IS STILL ACTIVE.
Inspect the harness connectors. Clean the contacts of the harness connectors and check the wires for damage to the insulation that is caused by excessive heat, battery acid, or chafing.
Perform a 45 N (10 lb) pull test on each of the wires that are associated with the circuit.
Reconnect all harness connectors in order to make sure that the connectors are fully seated. Also, make sure that the clips for each connector are completely fastened.
Turn the disconnect switch and the key start switch to the ON position.
Operate the machine.
Determine if the CID 3000 FMI 02 is active.Expected Result:
Illustration 1 g01379300
Schematic of the speed sensor for the front wheel driveThis diagnostic trouble code is associated with the speed sensor for the front wheel drive. This diagnostic trouble code is recorded when the ECU reads the signal from the sensor and the ECU determines that the signal is erratic, intermittent, or incorrect.The possible causes of this diagnostic trouble code are listed:
Wire (X963-GY) is shorted to the ground circuit while the machine is in operation.
Wire (X962-WH) is shorted to the +battery.
An open circuit exists.
The ECU has failed. This is unlikely.Note: The following test procedure may create other diagnostic trouble codes. Ignore these created diagnostic trouble codes and clear the diagnostic trouble codes when the original diagnostic trouble code has been corrected. Ensure that the diagnostic trouble code of CID 3000 FMI 02 is active before performing this procedure.Note: Use a digital multimeter for the measurements in this procedure.Test Step 1. VERIFY THE SOFTWARE VERSION.Note: From SIS or the latest release of the CD for SIS, check and record the latest software version for the machine electronic controls.
Verify that the Transmission ECU has the most current version of software.
Verify that the ECU has the latest version of software.Expected Result:All of the software is current.Results:
OK - All of the software is current. Proceed to Test Step 2.
NOT OK - A recent version of software is available.Repair: Flash all controls with the latest software release. Refer to Testing and Adjusting, "Electronic Control Unit - Flash Program".STOPTest Step 2. CHECK THE HARNESS.
Turn the key start switch to the OFF position.
Inspect the harness.
Check for the proper mating.
Check the exposed wires for nicks and abrasions.
Check for moisture, dirt, or corrosion.
Check the pin/socket for a proper fit.
Disconnect the machine harness connectors from the Transmission ECU.
At the machine harness connector, measure the resistance from connector contact J1-15 (wire X962-WH) and J1-16 (wire X963-GY) to all of the contacts in the J1 and J2 machine harness connectors. Expected Result:The resistance should be less than 5 ohms.Results:
OK - The resistance is less than 5 ohms. The machine harness is correct. Proceed to test step 3.
NOT OK - The resistance is greater than 5 ohms. There is an open in the machine harness. The open is in wire X962-WH or in wire X963-GY.Repair: Repair the machine harness or replace the machine harness.STOPTest Step 3. CHECK IF THE DIAGNOSTIC TROUBLE CODE IS STILL ACTIVE.
Inspect the harness connectors. Clean the contacts of the harness connectors and check the wires for damage to the insulation that is caused by excessive heat, battery acid, or chafing.
Perform a 45 N (10 lb) pull test on each of the wires that are associated with the circuit.
Reconnect all harness connectors in order to make sure that the connectors are fully seated. Also, make sure that the clips for each connector are completely fastened.
Turn the disconnect switch and the key start switch to the ON position.
Operate the machine.
Determine if the CID 3000 FMI 02 is active.Expected Result:
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
571G, 572G, 583K, 594, 594H, D7F, D7G, D8H, D8K, D9G, D9H
1090, 1190, 1190T, 120, 120B, 120G, 120H, 120H ES, 120H NA, 1290T, 12F, 12G, 12H, 12H NA, 130G, 135H, 135H NA, 1390, 140, 140B, 140G, 140H, 140H NA, 143H, 14E, 14H, 16, 160H, 163H, 16G, 16H NA, 16M, 2...
235, 3304, 3306, 561D, 571G, 572G, 583K, 589, 651E, 657E, 992C, 992D, D10, D4E SR, D5B, D6D, D6E, D6F SR, D6G, D6G SR, D7G, D8K, D8L, D9H, D9L
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
D353C, D379, D398, D9G, D9H
594, D326F, D353C, D9E, D9G, D9H
120, 120B, 12F, 140, 140B, 14E, 16, 16G, 245, 245B, 245D, 3304B, 3306, 5130, 5130B, 5230, 5230B, 561B, 561C, 572G, 578, 589, 594H, 613, 621, 621B, 621E, 621F, 621R, 623, 623E, 623F, 627, 627B, 627E, 6...
1090, 1190, 1190T, 1290T, 1390, 205B, 211B, 215, 215B, 225, 227, 229, 2290, 231D, 235, 235C, 235D, 2390, 2391, 245, 2491, 2590, 307, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 C...
14E, 225, 235, 627B, 920, 941, 950, 955L, D6C, D7G, D8H, D8K, D9H
594H, D9H
561D, 572G, 583K, 594, 594H, 977L, 983, 983B, D5B, D5E, D6D, D6E, D6E SR, D6F SR, D6G, D6G SR, D6G2 LGP, D6G2 XL, D7G, D7G2, D8H, D8K, D9G, D9H
12G, 140G, 3306, 561D, D5B
528, 966C, 977L, D6D
140G, 14G, 528, 966C, 966R, 977L, D6D
571G, 572G, D7G
571G, 572G, 977L, D7G
930, 977K
910, 931B, D3B
910, 931, 931B, D3, D3B
120G, 130G, 3304, 920, 930, 950, 955L, D4D, D4E
594H, D9H