VALVE 5W5808 - Caterpillar

Events (Alarms and Notices)
Touching the "Event" symbol takes you to the system "Event Log".
Illustration 1 g02452490
Event log screenNotices and Alarms
The "Event Log" screen allows you to select for display all events, alarm and notice, or alarms only. You may also email the events log to an email address. Which is a useful way to transfer information for remote diagnostics to a qualified Caterpillar technicianNotice Messages – System errors that are not critical will generate Notice Messages. When this condition exists, the system will not go to Bypass mode. However, a service technician may be required to fix the problem.A Notice Message causes the ""banner to display on the touchscreen. The system also emits an audible alarm. These messages are displayed in the "Event Log". The "Event Log" may be accessed from the touchscreen display. The "Event Log" may also be accessed in UPSView.Examples of the events that generate notice messages are in the following list:
Fan Failures
Abnormal Thermal ConditionsAlarm Messages – System errors that are critical generate "Alarm Messages". "Alarm Messages" indicate that the system has experienced a critical event and operator action is required. An "Alarm Message" will cause the "Alarm message" to be displayed. The system also emits an audible alarm. These messages are printed to the "Event Log". The "Event Log" may also be accessed in UPSView. Examples of the events that generate "Alarm Messages" are in the following list:
Multiple Fan Failures
Extreme Thermal Conditions
Overload Conditions
Emergency Power Off EventEmailing and Exporting Events
To email an event log, simply select the field and use the virtual keyboard to enter the destination email address in the "To" address line and touch the "Email Events" button.Setting Up Email Addresses for Exporting Events
You can set up email accounts to which the system will send alarms and notices. You can set the mail system up to where the emailed event log is delivered never, monthly, weekly, or daily. You can also set the email system up to send service and caution notifications.To set up the email, perform the following steps.
From the "Navigation Screen" select "Email Setup" from the "Navigation" buttons at the right. Refer to Illustration 2
Select the email options by touching the desired radio button.
Touch the email address line. The virtual keyboard will appear as in Illustration 3.
Touching the required characters in the email address on the virtual keypad, enter the email address.
Touch the green check mark when done.After step 5, the screen will appear as Illustration 4
Illustration 2 g02452498
Email setup screen
Illustration 3 g02452569
Email address entry screen with virtual keypad
Illustration 4 g02452571
Email address and email options entered (example)Exporting Events to a USB Device
To export to a USB device:
Create a folder on your USB storage device tilted "Display_logs".
Connect the USB storage device to the USB port on the front of the SIO cabinet, below the touchscreen display.
Select the "Events" symbol to go to the events window.
Touch the "Export Events" button on the touchscreen.Note: Do not remove the USB device until all information has been transferred. The system displays a message when the transfer is complete.