VALVE 6A9619 - Caterpillar

Note: All items appear in the currently selected units. Meters (m) are shown to two decimal places. US Survey Feet (FT) and International Feet (ft) are shown to one decimal place.Customizing Text Items
You can customize the Display in order to show text on the plan view, cross section view, and text views. Alternatively, you can choose to show no text at all.By default, you must be in Service Mode in order to access the text items setting in the "Setup Menu – Configuration" dialog.The "Text Items" dialog allows you to select up to five items of information to appear on each of the views. If you choose to select only one or two items on a view screen, then the text uses a larger font than if three to five text items are selected. A text view screen is not shown if the screen has no items selected.If you select one to three items of information on the plan view and the cross section view, the items appear along the top of the view. If you select four or five items, then all of the items appear down the right side of the view.Perform the following steps in order to set up the text Items.
In Service Mode select the "Setup Menu – Configuration" dialog, press the down arrow key or the up arrow key until "Text Items" is highlighted. Then press the "OK" key.
Press the "Text View 1" soft key. A dialog similar to Illustration 1 appears.
Illustration 1 g01024722
The "Available Items" list shows all of the items that can appear in the plan view, cross section view, text view 1, and text view 2. The items are described in table 1.The following is a list of information for the "Text Items" dialog.
The opening screen shows the list of items that are selected to appear on the plan view.
Press the "Cross-section" soft key in order to show the list of items that are selected to appear on the cross section view.
Press the "Text View 1" soft key in order to show the list of items that are selected to appear on text view 1.
Press the "Text View 2" soft key in order to show the list of items that are selected to appear on text view 2.
If there are fewer than five items selected for a selected view, and the highlighted option in the "Available Items" list is not selected, the "Add"soft key is available as soft key 6.
If the highlighted option in the "Available Items" list is already selected, the "Remove" soft key is available as soft key 6.
If there are already five items selected to appear on the selected view, and the highlighted option in the "Available Items" list is not selected, soft key 6 is blank.Perform the following steps in order to remove an item from any of the views.
Press the "Plan View"soft key, the "Cross-section"soft key, the "Text View 1" soft key, or the "Text View 2" soft key in order to show the appropriate view