VALVE GP-BANK 6E1930 - Caterpillar

Engine:
C-12 (S/N: 9SM1-UP)
Industrial Engine:
C11 INDUSTRIAL (S/N: GLS1-UP)
C13 INDUSTRIAL (S/N: RRA1-UP; LGK1-UP)
Marine Engine:
C12 MARINE (S/N: NFL1-UP; C1Z1-UP)
Petroleum Engine:
C11 PETROLEUM (S/N: B5K1-UP)
A new procedure has been implemented at assembly to insure that the isolation seal is seated properly to the oil pan when installed.
Illustration 1 g03388511
Disassembly
Remove the old RTV from all four T-joints prior to applying new RTV. Refer to Illustration 1.
Ensure that the oil pan and mating surfaces are clean and free of oil.Assembly
Insure RTV completely penetrates the joints.
Apply 4C-9614 Silicone Sealant at four locations marked (1). Apply the sealant in 4 1 mm (0.16 0.04 inch) diameter beads.
Illustration 2 g03388521
Note: All joints using the 4C-9614 Silicone Sealant must be assembled within 10 minutes of application.
Tighten all oil pan bolts to the correct torque in the sequence shown in Illustration 2.