VALVE GP-CONTROL 6E4051 - Caterpillar

Front Working Lights (1) - Indicates the front working lights are on. Rear Working Lights (2) - Indicates the rear lights are on. Direction Indicator Lights (3) - Indicates the direction lights are working. Vibration Indicator Light (4) - Indicates the front and/or rear vibrators of the compactor are working.Gauges (Standard)
Vibration Meter - Indicates the number of vibrations per minute of the front drum. Fuel Level - Shows the amount of fuel in the fuel tank. It is advised to refill the tank before running out of fuel in order to avoid the injection pump priming procedures to restart the engine. Water Gauges - Indicates the amount of water in the water tanks.Gauges (If Equipped)
Tachygraph - The machine can be equipped with a tachygraph with the following functions: Travel Speed Indication (1) - Indicates the travel speed in km/h or ft/min. The reading can be divided by 10 to obtain actual travel speed. Graduations are given in increments of 10. Vibration Frequency Indication (2) - The reading is the actual vibrations per minute divided by 100. Clock (3) - Records the time of day and is adjustable. Kilometer Gauge (4) - Indicates the number of kilometers which have been traveled. The reading is given in hectometers. 10 kilometers equals 1 kilometer hectometers.The module also has a recording function, a disc (5) is mounted inside the module.
Front View of Disc FaceRegisters the working time (1).Registers the travel speed (2). The reading registered on the disc must be divided by 10 to obtain the actual travel speed.Registers the kilometers travelled (3). Each point of the reading is equal to 1 kilometer.
Rear View of Disc BackRegisters the vibration frequency. The reading gives the vibration frequency in vibrations per minute (vpm).Speedometer
Speedometer - Indicates the travel speed of the machine in mpm or ft/min.Service Hour Meter
Service Hour Meter - Indicates the total operating hours of the engine. It should be used to determine service intervals.Light Switch (if equipped)
Off (1) - Move the switch to this position to turn lights off. Lights (2) - Rotate the knob to the right (clockwise) to the first notch to turn on the front and rear lights. Running Lights (3) - Rotate the knob to the right (clockwise) to the second notch to turn on the running lights. Flood Lights (4) - Rotate the knob to the right (clockwise) to the third notch to turn on the flood lights. Rotating Beacon Light (5) - Rotate the knob to the right (clockwise) to the fourth notch to turn on the rotating light. Hazard Warning Light (6) - Rotate the knob to the right (clockwise) to the fifth notch to turn on the hazard warning light. Cab Light (if equipped) - Push the switch in on the light to turn the light on or off.Directional Turn Signals (if equipped)
Directional Turn Signals - Move the switch to the left or right according to the desired direction.Horn
Horn - Push the knob (if machine is equipped with lights) or button (if machine