VALVE GP-RELIEF 6E4139 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Bracket     1    
Illustration 1 g01084565
Position retarder (10) and install bolts (11). The weight of the retarder is approximately 125 kg (275 lb).
Illustration 2 g01084561
Remove Tooling (A) and a suitable lifting device from retarder (10) .
Illustration 3 g01084558
Position elbow (9) and hose assembly (8). Install bolts (7) .
Illustration 4 g01084554
Install cage assembly (5) and bolts (6). Connect hose assembly (4) .
Illustration 5 g01084513
Install tube (2) and hose (1). Tighten clamps (3) .
Refill the transmission oil. Refer to Operation and Maintenance Manual, "Lubricant Viscosities" for information regarding the correct lubricant viscosity. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for information regarding the correct refill capacity.End By:
Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Install the retarder hydraulic control valve. Refer to Disassembly and Assembly, "Retarder Hydraulic Control Valve - Install".
Install the drive shaft. Refer to Disassembly and Assembly, "Drive Shaft - Remove and Install".