VALVE GP-CHECK 6E4701 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-6396 O-Ring Assembly Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01079448
Install O-ring seal (14) on oil cooler bonnet (9). Apply Tooling (A) to the O-ring seal. Install the oil cooler bonnet in the engine oil cooler.
Install integral seal (11) on oil cooler bonnet (9). Position the oil cooler bonnet on the water pump and install bolts (10).
Install O-ring seals (12) on the engine oil filter base.
Slide core assembly (8) toward the front of the engine. Rotate the core assembly into position. Install bolts (13).
Illustration 2 g01079434
Install integral seal (3) and O-ring seal (7) on outlet bonnet (6). Apply Tooling (A) to the O-ring seal. Position outlet bonnet (6) and install bolts (4).
Connect hose assembly (5).
Illustration 3 g01079420
Connect hose (2).
Connect hose assembly (1).
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".