VALVE GP-RELIEF 6E4703 - Caterpillar

Connect hose assembly (27).
Illustration 20 g03360564
Install tube (25) and U-bolt (26). Connect hose (24).
Illustration 21 g03360560
Install hose (23) and tighten clamp (22). Connect clip (21).
Illustration 22 g03360558
Install bracket (20).
Illustration 23 g03360553
Connect hoses (19).
Illustration 24 g03360551
Connect hose (18).
Illustration 25 g03360472
Install door (17).
Illustration 26 g03360465
Install clip (16).
Illustration 27 g03360459
Install heat shield (15), clips (14), and clip (13) to hose assembly (11).
Illustration 28 g03360452
Connect clips (14).
Illustration 29 g03360448
Apply Tooling (C) to O-ring seal (12) (not shown). Install O-ring seal (12) (not shown) to hose assembly (11). Connect hose assembly (11). Connect clip (13).
Illustration 30 g03360444
Install panel (10).
Illustration 31 g03360443
Install plate (9).
Illustration 32 g03360420
Position upper engine shield (6). Install four bolts (8) (two not shown). Install bolts (7).
Illustration 33 g03360393
Connect hose (5). Install clips (4).
Illustration 34 g03330059
Turn battery disconnect switch to the ON position. Lower hood (1) by activating switch (2).
Charge the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the tools.
Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct filling procedure. End By:
Install the primary fuel filter.