VALVE GP- 6E4717 - Caterpillar

Illustration 133 g02937919
Install the support (3), bracket (8), and cover (6) to the left side of the machine. Use four bolts (10), four washers (11), one bolt (15), and one washer (12).
Illustration 134 g02937940
Install a new cover (1). Use nine bolts (10) and nine washers (11).
Illustration 135 g02937960
Install the cover (4). Use five bolts (10) and five washers (11).
Repeat Steps 1 through 3 on the right side of the machine with the repaining parts in Table 31. Also install a bracket (14) to the boss that was installed to the frame earlier in the instruction. Use a bolt (10) and washer (11) to install the bracket.Relocation of the Tandem Lights
Table 31
Required Parts
Callout Part Number Description Quantity
1 288-5530 Bracket 2
2 8T-4136 Bolt 4
3 8T-4121 Washer 4
4 130-5300 Clip 2 The existing lights for the tandems will need to be relocated from the A/C cover to one of the supports for the walkway.
Illustration 136 g02941696
Install a new bracket (1) to the forward edge of the support for the left walkway. Use two bolts (2) and two washers (3).
Illustration 137 g02943197
Install the existing light fixture (A) to the new bracket (1). Use the existing hardware for the light to secure a clip (4) between the bracket (1) and the light. Connect the existing wire harness for the light, secure the connector to the clip (4).
Repeat Steps 1 through 2 on the opposite side of the machine.