VALVE GP-PILOT 6I6934 - Caterpillar

Illustration 1 g03208716
Table 1
Specification for 352-7957 Gear Pump Gp    
Item     Qty     Part     Specification Description    
1     2     353-3679 Lip Type Seal     Lubricate the sealing lip light with clean oil.    
-     -     -     Before running the pump, lubricate the pump with clean transmission oil.    
-     -     -     Rotate the pump by hand. The pump must rotate freely.    
A     1     297-1803 Gear As     Diameter of the shaft is
31.742 0.005 mm (1.2497 0.0002 inch).    
B     -     -     Clearance between the gears and the cover is
0.107 0.026 mm (0.00421 0.00102 inch).    
E     1     297-1803 Gear As     Diameter of the shaft is
31.742 0.005 mm (1.2497 0.0002 inch).    
Illustration 2 g03208777
Detail of area C
Table 2
Item     Qty     Part     Specification Description    
2     1     5M-3320 Bushing     Bore after assembly is
31.826 0.039 mm (1.2530 0.0015 inch).    
Position (G) of bushing joint from the centerline through bushing bores is 30 15 degrees.
Installation depth (H) is
1.50 0.25 mm (0.059 0.010 inch).
3     1     187-0671 Bushing     Bore after assembly is
31.826 0.039 mm (1.2530 0.0015 inch).    
Position (G) of bushing joint from the centerline through bushing bores is 30 15 degrees.
Installation depth (H) is
1.50 0.25 mm (0.059 0.010 inch).
Illustration 3 g03208837
Detail of area D
Table 3
Item     Qty     Part     Specification Description    
4     2     5M-1995 Bushing     Bore after assembly is
31.786 0.008 mm (1.2514 0.0003 inch).    
Position (M) of bushing joint from the centerline through bushing bores is 30 15 degrees.
Installation depth ( L) is
1.50 0.25 mm (0.059 0.010 inch).
J     2     8M-8489 Dowel     Protrusion is
6.4 0.5 mm (0.25 0.02 inch).