VALVE AS-CONTROL 6T1823 - Caterpillar

1. Keep engine speed low until oil pressure registers. If oil pressure does not register, stop engine and investigate.2. Operate under light load for 5 minutes. 3. Check engine cooling system warning light. If light is on, stop engine and check cooling system. 4. Check crankcase oil level with engine at low idle, machine level and oil warm. Oil level should be between ADD and FULL marks on ENGINE RUNNING side of dipstick. 5. Check transmission oil level with engine at low idle, machine level and oil warm. Oil level should be between ADD OIL and FULL marks on dipstick. 6. Check hydraulic oil filter change indicator. If RED plunger is locked in visible position, have filters serviced. 7. Check air cleaner service indicator. If RED piston is locked in visible position, have air cleaner serviced.Gauges
Check gauges frequently during operation. All gauges must indicate in NORMAL operating range. The ammeter reading is normal when the indicator is at or on the (+) side of zero.