VALVE GP-SELECTOR & PRESS CONT 6T9555 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     1
   Start By:
Remove the hood. Refer to Disassembly and Assembly, "Title - Hood Remove and Install".
Illustration 1 g00659428
Attach Tooling (A) to the rear of the engine. Attach a suitable hoist to Tooling (A) .
Illustration 2 g00619130
Remove wire tie-wraps (1) that secure wires (2) to clips (6). Move wires aside.
Remove two bolts (3). Attach a suitable nylon strap to pump (4). Remove pump (4) from the adapter plate and the flange.Note: Do not remove any of the hydraulic hoses from the hydraulic pump. Move the hydraulic pump to the side as far as possible.
Illustration 3 g00616648
Remove two rear engine mount bolts (5) and the rubber washers (6) .
Illustration 4 g00659428
Raise the rear of the engine with Tooling (A) and a suitable lifting device.
Illustration 5 g00616655
The engine was removed for photographic purposes.
Remove seven bolts (9) and the washers that secure adapter plate (8) to the engine.
Remove five clips (7) and five bolts (9) from the top of the adapter plate. Note the location of clips (7) for installation purposes.
Attach a suitable lifting device to the lifting eye of adapter plate (8). Remove adapter plate (8) from the engine. The weight of adapter plate (8) is 34 kg (75 lb).
Illustration 6 g00616678
Remove eight bolts (10) that secure flange (11) to the engine. Remove flange (11) from the engine.
Illustration 7 g00616698
Illustration 8 g00616711
Loosen allen head screw (13) and remove coupling hub (12) from the spline of hydrostatic pumps (4) .