VALVE GRINDING 6V2531 - Caterpillar

Wireless Communication Option
AccuGrade Wireless Communication is an available option for the AccuGrade V10 CD700 display. This option provides the site manager the ability to wirelessly transmit updated design information to the machines on site, perform basic remote diagnostics and send simple test messages to the machines. This option can be purchased and installed on each CD700 display.Option Key Purchase Procedure
Refer to the appropriate AccuGrade pricelist in order to purchase the AccuGrade CD700 wireless communication option key.
Order the key per the instructions on the pricelist.
Record the wireless key reference number, order dealer code and the order reference number.
Obtain and record the serial number from the identification plate on the display in order to have wireless communications option activated.
Go to website: www.techproductregistration.com or <http://www.techproductregistration.com>
Complete option key activation form on the website. Refer to Special Instruction, REHS3666 for information about the option key activation form.
If access to the website is not available, call 888-223-7539 for key administration.
After the data fields are completed, select "Submit" on web form. You will be asked to review the data again. You must confirm your input. Review the information. Select "Confirm" in order to have the information accepted or select "Back" in order to edit the existing information.
Within 30 minutes, an email will be sent to the dealer's email address with the web form that was submitted. The email will have the option key code number that is needed in order to activate the option on the requested display. A phone call will be made to the phone number that was submitted on web form in order to confirm that the email with option key code number was received. Provide the key code to the appropriate person in order to have the key code installed on the display. Save the option key code information for future reference.
An invoice will be sent from Antares for the purchase of the option key.Procedure for Entering the Registration Key into the Display
Power up the system in the "Service" mode. Turn the key switch to the "ON" position. In order to access the "Service" mode, you must press the "OK" button and hold the "OK" button, then press the "Power" button before you release the "OK" button. Release both buttons once the display begins initialization.
Press the "Menu" button (8). The "Setup Menu-Configuration" screen will appear.
Illustration 1 g01382719
Select "Installation".
Use the "Arrow Keys" in order to select "Software Support Option".
Press the "OK" key.
Perform one of the two options below:
Copy the Wireless Option key file obtained above "Option key<serial number>.txt" to the root folder of a data card. Insert the Data and the display will read the key.
Enter the 24 character option key code that was obtained in the preceding steps. In order to perform this, use the "Arrow Keys" on the keypad of the display.
Press the "OK" key .If the 24 character option key code was loaded sucessfully, then the "Option Keys File Loaded" window will appear. Refer to Illustration 2.
Illustration 2 g01313129
Press the OK key. The Plan View appears.Note: If the key does not