VALVE GP-SELECTOR & PRESS CONT 6Y2339 - Caterpillar

Illustration 1 g01451367
Illustration 2 g01451366When the electric starting motor is viewed from the pinion end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25 °C (77 °F) Speed ... 6900 1800 rpmCurrent ... 150.5 27.5 AmpVoltage ... 11 VDC (A) Clearance between the pinion and the housing ... 9.1 mm (0.36 inch) (1) Final installation torque for the ground terminal nut ... 30.5 3.5 N m (270 30 lb in)Note: A maximum of three cable terminals or wire terminals may be used with the battery terminal nut (2). A maximum of two of the cable terminals may be equal to or greater than 0 AWG. (2) Final installation torque for the battery terminal nut ... 30.5 3.5 N m (270 30 lb in) (3) Final installation torque for the ground terminal nut ... 2.25 0.25 N m (20 2 lb in)Note: The switch terminal must be insulated with heat shrink tubing. Do not use molded terminals. (4) Final installation torque for the switch terminal nut ... 2.25 0.25 N m (20 2 lb in) (5) Final installation torque for the motor terminal nut ... 30.5 3.5 N m (270 30 lb in) (6) Final installation torque for the bolt for the motor frame terminal ... 8 3 N m (70 27 lb in)Solenoid kitCurrent draw at 10 V and 25 °C (77 °F) Pull-in windings ... 97 AmpHold-in windings ... 18 AmpMaximum rated current ... 1600 Amp