VALVE GP-SELECTOR & PRESS CONT 6Y3201 - Caterpillar

PARTS NEEDED
Qty
Part Number Description
1 8T9022 GASKET-SILICONE
2 1545404 BUSHING
2 2198798 SEAL-LIP TYPE
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 3% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Refer to RENR6475 Disassembly and Assembly Service Manual for 414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, and 444E Backhoe Loaders Power Train.
1) Disassemble carrier from axle housing.
2) Clean bushing OD and carrier ID area of oil and rust.
3) Apply a bead of 8T-9022 RTV Sealant around the base of the bushing in the axle housing.
4) Assemble carrier to housing and wipe off excess sealant inside the housing bore.
The pendulum bearing should be dry. Do NOT add grease when installing the pin.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-2000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 6.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.