VALVE GP 8E5525 - Caterpillar

Table 1
Service Tools    
Part Number    Part    
146-4080     Digital Multimeter (1)    
7X-1710     Multimeter Probe Group    
8T-8726     "3 Pin Cable Assembly"    
6V-3000     Connector Repair Kit (Sure Seal)    
9U-7246     Connector Repair Kit (Deutsch DT Type)    
4C-3406     Connector Repair Kit (Deutsch)    
300-7925     Cable Assembly    
300-7924     Cable    
None     Diagnostic Software    ReferenceRefer to "Obtaining ECM Diagnostic And Flash Files" within Troubleshooting, "Determining Diagnostic Trouble Codes" for detailed instruction for the use of the diagnostic file.For instructions on servicing Sure Seal connectors, refer to Special Instruction, SMHS7531. For instructions on servicing Deutsch DT connectors, refer to Special Instruction, SEHS7734.Use the digital multimeter to making continuity checks or for measuring voltage. The 7x-1710 Multimeter Probe is used to measure the voltage without disconnecting the connector. The probe cables are pushed into the back of the connector along the wire. The 8T-8726 Adapter Cable has a breakout of three pins. The adapter cable is used for measurements in the sensor circuits.Note: For Cat electrical circuits: except for harness tests, use continuity tester 8T-0500 Continuity Tester, or voltage tester 5P-7277 Voltage Tester.