VALVE ASSEM. 9M6369 - Caterpillar

Image1.16.1
17. Continue assembly on the Valve Body Seals (1-2) and grease fitting (3) as seen in Image 1.17.1.
Image1.17.1
18. Install Front Head Seals (1-2) as seen in Image 1.18.1.
Image1.18.1
19. Install Seal Carrier Seals (1-6) as seen in Image 1.19.1.
Image1.19.1
20. Install Seal Carrier (1) into Valve Body (2) as seen in Image 1.20.1.
Image1.20.1
21. Assemble Accumulator Cover (1), Diaphragm (2), Base (3), and O-Ring (4) as seen in Image 1.21.1.
Image1.21.1
22. Install four Bolts (1) into Accumulator (2) as seen in Image 1.22.1.
Image1.22.1
23. Use suitable lifting device to install Valve Body (1) onto Front Head (2) as seen in Image 1.23.1.
Image1.23.1
24. Install four Head Bolts (1) into Valve Body (2) as seen in Image 1.24.1.
Image1.24.1
25. Charge the Accumulator (1) and Back Head (2) with Nitrogen Gas as seen in Image 1.25.1.
Image1.25.1
26. Install Buffer Jacket (3) onto Powercell (1) and install into Housing (2) using a suitable lifting device as seen in Image 1.26.1.
Image1.26.1
27. Install Upper Buffer (1) and Mounting Bracket as seen in Image 1.27.1.
Image1.27.1
28. Install Tool (2) and Tool Retaining Pin (1) into Housing (3) as seen in Image 1.28.1.
Image1.28.1