VALVE GP-CHECK & RELIEF 9T4010 - Caterpillar

ACTION REQUIRED
****Parts Stock ****
Remove all 279-7752, 266-6225, 255-2878, 279-7753, 266-6226, 255-2879 Pulley Assemblies and 255-2926, 212-8595 Bearings from dealer parts stock.
****Affected Product****
The correct pulley assembly needed for repair depends on the engine arrangement for the machine. In order to determine the engine arrangement, refer to the label that is located on the top of the engine. Refer to Image 2 for the location of the label. Then use the table in Image 1 in order to determine the correct pulley assembly needed for your machines engine arrangement.
Move the machine to the rework area and rest the front linkage on the ground. Turn the engine key off and leave the hydraulic lock lever in the operational position. Release the residual hydraulic pressure of pilot lines by moving the implement control lever. Place the hydraulic lock lever in the locked position. Remove the pulley and replace with a new pulley assembly. Refer to the appropriate service manual in order to remove and install the new pulley assembly.
Image1
Image2
SERVICE CLAIM ALLOWANCES
****Parts Stock****
Submit one claim for all parts removed from dealer parts stock.
****Affected Product****
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-6000 hrs,
0-36 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
6001-10000 hrs,
37-60 mo 33.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 3.0-hour job
PARTS DISPOSITION
****Parts Stock****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
****Affected Product****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.