VALVE GP-CONTROL 9W9965 - Caterpillar

ACTION REQUIRED
The existing 2640349/">264-0349 Radiator Panel needs to be replaced.
Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-9999 hrs 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 2.0-hour job for Group 1
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-9999 hrs 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 2.0-hour job for Group 2
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
References:
SEBP4321 Parts book - C9 Generator Set
RENR8644 Disassembly and Assembly - C9 Generator Set
Tools:
8T9014 Silicone Tube
1.Isolate Genset before commencing any work on the unit. Activate Emergency stop, open Genset breaker and disconnect battery cables. Ensure health and safety requirements are adhered to at all times.
Image1.1.1
2.Remove radiator panel (10) located in the front of the enclosure (see image 1.1.1).
Image1.2.1
3.Remove the film from the 265-8882 Insulation Assembly foam. (see image 1.2.1).
Image1.3.1
4. Attach the foam to the radiator panel (see image 1.3.1)
5. Install the new panel to the enclosure.
Image1.4.1
6. Apply silicone to joints around radiator panel (10) (see image 1.4.1).
7. Clear generator area, reconnect batteries, and release emergency stop.
8. Run functional No load test on Genset.