2W5089 VEE BELT Caterpillar parts
D9L
Rating:
Alternative (cross code) number:
CA2W5089
2W-5089
2W5089
CA2W5089
2W-5089
2W5089
Weight: 54 pounds 24 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
D&D PowerDrive 2W5089 Caterpillar Replacement Belt, 98" Length, Rubber
D&D PowerDrive Belt B/5L 21/32 x 98in OC. || Material type: rubber || Manufactured by D&D Power Drive || Made in China
D&D PowerDrive Belt B/5L 21/32 x 98in OC. || Material type: rubber || Manufactured by D&D Power Drive || Made in China
D&D PowerDrive 2W5089 Caterpillar Replacement Belt, 98" Length, Rubber
D&D PowerDrive Belt B/5L 21/32 x 98in OC. || Material type: rubber || Manufactured by D&D Power Drive || Made in China
D&D PowerDrive Belt B/5L 21/32 x 98in OC. || Material type: rubber || Manufactured by D&D Power Drive || Made in China
2W5089 Replacement Belt for Caterpillar Drive Belt
GIVLETICS -✅ RELIABLE PERFORMANCE: 2W5089 replacement belts are versatile. USA-made for quality and longevity. || -✅ Do not let your machinery come to a stop because of a belt that has become worn out. Repair your worn-out belt with our High-Performance Belt. Its high resistance to wear and strain makes it last longer and work better. || -✅ DURABLE MATERIAL: Made of durable, high-quality fabrics. Perfect for harsh settings and heavy-duty uses. || -✅ EASY TO USE: Drive belt is easy to install and maintain, with a unique feature that ensures proper alignment and tension. || -✅ The 2W5089 belt is the most reliable and efficient. This belt transmits power smoothly and efficiently due to its careful construction and resistance to wear and tear, making it an ideal substitute for a damaged belt.
GIVLETICS -✅ RELIABLE PERFORMANCE: 2W5089 replacement belts are versatile. USA-made for quality and longevity. || -✅ Do not let your machinery come to a stop because of a belt that has become worn out. Repair your worn-out belt with our High-Performance Belt. Its high resistance to wear and strain makes it last longer and work better. || -✅ DURABLE MATERIAL: Made of durable, high-quality fabrics. Perfect for harsh settings and heavy-duty uses. || -✅ EASY TO USE: Drive belt is easy to install and maintain, with a unique feature that ensures proper alignment and tension. || -✅ The 2W5089 belt is the most reliable and efficient. This belt transmits power smoothly and efficiently due to its careful construction and resistance to wear and tear, making it an ideal substitute for a damaged belt.
For full view, you need register
Compatible equipment models: 2W5089:
Information:
Removal Procedure
Start By:
Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Install a suitable lifting device to the flywheel housing in order to support the flywheel housing. The flywheel housing can weigh 32 kg (70.5 lb).
Illustration 1 g01337602
Typical example
Remove bolts (2). Remove bolts (4). Remove bolts (3) from flywheel housing (1).
Use the lifting device in order to remove flywheel housing (1) from the cylinder block.
Illustration 2 g01337603
Typical example
If the engine has an aluminum oil pan, remove dust seal (6).
Illustration 3 g01337605
Typical example
Remove joint (7).
If necessary, remove dowels (5) from the cylinder block.
Remove oil seal (8) from flywheel housing (1). Installation Procedure (Wet Back End Housing)
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
(M10 by 100 mm) 2
B 1U-8846 Gasket Sealant 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the flywheel housing is clean and free from damage. If necessary, replace the flywheel housing.
Illustration 4 g01337605
Typical example
Install a new oil seal (8) to flywheel housing (1). Note: Press the oil seal into the flywheel housing from the rear. Ensure that the front edge of the oil seal is flush with the joint face of the flywheel housing .
Inspect crankshaft rear seal (9) for leaks. If there are any oil leaks, replace the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Remove" and refer to Disassembly and Assembly, "Crankshaft Rear Seal - Install".
Illustration 5 g01337609
Engine with an aluminum oil pan
Illustration 6 g01337610
Engine with cast iron oil pan
Clean the rear face of the cylinder block. If necessary, install dowels (5) to the cylinder block.
Install Tooling (A) to the cylinder block.
Align a new joint (7) with Tooling (A). Install the joint to the cylinder block.
If the engine has an aluminum oil pan, install dust seal (6). If the engine has a cast iron oil pan, apply a bead of Tooling (B) to positions (X).
Install a suitable lifting device to the flywheel housing. The flywheel housing can weigh 32 kg (70.5 lb).
Illustration 7 g01337602
Typical example
Use the lifting device to align flywheel housing (1) with Tooling (A). Install the flywheel housing to the cylinder block.
Install bolts (2), bolts (4) and bolts (3).
Remove Tooling (A). Install remaining bolts (3).
Tighten bolts (2) to a torque of 190 N m (140 lb ft). Tighten bolts (4) to a torque of 115 N m (85 lb ft).Tighten bolts (3) to a torque of 63 N m (46 lb ft).
Check the alignment of flywheel housing (1) with the crankshaft. Refer to System Operation, Testing and Adjusting, "Flywheel Housing - Inspect". End By:
Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Install".
Start By:
Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Install a suitable lifting device to the flywheel housing in order to support the flywheel housing. The flywheel housing can weigh 32 kg (70.5 lb).
Illustration 1 g01337602
Typical example
Remove bolts (2). Remove bolts (4). Remove bolts (3) from flywheel housing (1).
Use the lifting device in order to remove flywheel housing (1) from the cylinder block.
Illustration 2 g01337603
Typical example
If the engine has an aluminum oil pan, remove dust seal (6).
Illustration 3 g01337605
Typical example
Remove joint (7).
If necessary, remove dowels (5) from the cylinder block.
Remove oil seal (8) from flywheel housing (1). Installation Procedure (Wet Back End Housing)
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
(M10 by 100 mm) 2
B 1U-8846 Gasket Sealant 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the flywheel housing is clean and free from damage. If necessary, replace the flywheel housing.
Illustration 4 g01337605
Typical example
Install a new oil seal (8) to flywheel housing (1). Note: Press the oil seal into the flywheel housing from the rear. Ensure that the front edge of the oil seal is flush with the joint face of the flywheel housing .
Inspect crankshaft rear seal (9) for leaks. If there are any oil leaks, replace the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Remove" and refer to Disassembly and Assembly, "Crankshaft Rear Seal - Install".
Illustration 5 g01337609
Engine with an aluminum oil pan
Illustration 6 g01337610
Engine with cast iron oil pan
Clean the rear face of the cylinder block. If necessary, install dowels (5) to the cylinder block.
Install Tooling (A) to the cylinder block.
Align a new joint (7) with Tooling (A). Install the joint to the cylinder block.
If the engine has an aluminum oil pan, install dust seal (6). If the engine has a cast iron oil pan, apply a bead of Tooling (B) to positions (X).
Install a suitable lifting device to the flywheel housing. The flywheel housing can weigh 32 kg (70.5 lb).
Illustration 7 g01337602
Typical example
Use the lifting device to align flywheel housing (1) with Tooling (A). Install the flywheel housing to the cylinder block.
Install bolts (2), bolts (4) and bolts (3).
Remove Tooling (A). Install remaining bolts (3).
Tighten bolts (2) to a torque of 190 N m (140 lb ft). Tighten bolts (4) to a torque of 115 N m (85 lb ft).Tighten bolts (3) to a torque of 63 N m (46 lb ft).
Check the alignment of flywheel housing (1) with the crankshaft. Refer to System Operation, Testing and Adjusting, "Flywheel Housing - Inspect". End By:
Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Install".
Caterpillar parts catalog:
Parts vee Caterpillar catalog:
1139947
VEE SET
AP-800C, BG-225B, BG-245C
AP-800C, BG-225B, BG-245C
5U8649
VEE BELT
D35HP, D400
D35HP, D400
6U3962
VEE BELT
D25C, D30C, D350C, D35C
D25C, D30C, D350C, D35C
D8H
D8H
