4M6292 VEE BELT Caterpillar parts
651, 666
Rating:
Alternative (cross code) number:
CA4M6292
4M-6292
4M6292
CA4M6292
4M-6292
4M6292
Weight: 0.70 pounds 0 kg.
Information:
EFFECTIVE LENGTH
1575
mm
GROOVE WIDTH
17.53
mm
WHEEL TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 4M6292 External Engine V-Belt, 3/4" Size, 62" Length
CTP For External engine || 3/4" Size || 62" Length
CTP For External engine || 3/4" Size || 62" Length
CTP 4M6292 External Engine V-Belt, 3/4" Size, 62" Length
CTP For External engine || 3/4" Size || 62" Length
CTP For External engine || 3/4" Size || 62" Length
Number on catalog scheme:
None
For full view, you need register
Information:
Remove And Install Spacer Plates
Start By:a. remove cylinder heads 1. Remove gasket (1) from the spacer plate. 2. Remove seals (2), seals (3) and O-ring seal (5) from spacer plate (4).3. Remove spacer plate (4) from the dowels in the cylinder block. 4. Remove gasket (6) and O-ring seal (7) from the dowels. The following steps are for the installation of the spacer plates.5. Make sure the spacer plate and the machined surface of the cylinder block are clean and free of dirt and foreign material.
Both surfaces of the spacer plate gasket and the top of the cylinder block must be clean. Do not use a gasket adhesive on these surfaces.
6. Install new spacer plate gasket (6) over the dowels in the cylinder block.7. Install O-ring seal (7) around the dowel.8. Install spacer plate (4) on the dowels.9. Install new water seals (2) and (3) in spacer plate.10. Install O-ring seal (5) around the dowel.11. Install new cylinder head gasket (1) on the spacer plate.12. Check the cylinder liner projection. See the topic, Install Cylinder Liners.End By:a. install cylinder heads
Start By:a. remove cylinder heads 1. Remove gasket (1) from the spacer plate. 2. Remove seals (2), seals (3) and O-ring seal (5) from spacer plate (4).3. Remove spacer plate (4) from the dowels in the cylinder block. 4. Remove gasket (6) and O-ring seal (7) from the dowels. The following steps are for the installation of the spacer plates.5. Make sure the spacer plate and the machined surface of the cylinder block are clean and free of dirt and foreign material.
Both surfaces of the spacer plate gasket and the top of the cylinder block must be clean. Do not use a gasket adhesive on these surfaces.
6. Install new spacer plate gasket (6) over the dowels in the cylinder block.7. Install O-ring seal (7) around the dowel.8. Install spacer plate (4) on the dowels.9. Install new water seals (2) and (3) in spacer plate.10. Install O-ring seal (5) around the dowel.11. Install new cylinder head gasket (1) on the spacer plate.12. Check the cylinder liner projection. See the topic, Install Cylinder Liners.End By:a. install cylinder heads
Caterpillar parts catalog:
Parts vee Caterpillar catalog:
651, 943
651
651, 657
641, 651, 666
641, 666
5M0924
VEE BELT
641B, D40D
641B, D40D
641, 651, 666
651, 657
651
7N0185
VEE BELT SET (INCLUDES 2 BELTS)
613B, 930
613B, 930
641B, 772, 773
631C
641B, 772
657, 657B
641, 666