VEE BELT SET 5M5343 - Caterpillar

The monitoring system is designed to alert the operator to an immediate problem with any of the engine systems that are monitored. The Monitoring System is also designed to alert the operator to an impending problem with any of the engine systems that are monitored.The monitoring system parameters can be accessed via the Cat ET service tool. Many of the parameters within the monitoring system can be tailored to suit the operation of the engine.An example of adjustments that may be made within the monitoring system is changing the setpoint of the engine overspeed indicator from the factory default setting.Instrument Panel
Illustration 1 g03353026
Instrument panel
(1) service tool connector
(2) engine start switch (key)
(3) keypad
(4) message display
(5) circuit protectionService Tool Connector (1)
For more information about the use of Cat ET and the PC requirements for Cat ET, refer to the documentation that accompanies your Cat ET software.Engine Start Switch (2)
The engine start switch must be in the ON position and the engine must be running in order to maintain electrical functions and hydraulic functions. This procedure must be followed in order to prevent serious machine damage.
Your machine may be equipped with a Type 1 key switch or your machine may be equipped with a Type 2 key switch. Both the Type 1 key switch and the Type 2 key switch are shown below.Type 1 key switch
Illustration 2 g02362719
Type 1 key switch
Engine Stop (Shutdown) - Turn the key to this position to disable the