5S5249 VEE BELT Caterpillar parts
375, AD55, D4H, D4HTSK II, D9G, R2900G, R3000H
Rating:
Alternative (cross code) number:
CA5S5249
5S-5249
5S5249
CA5S5249
5S-5249
5S5249
Weight: 0.50 pounds 0 kg.
Information:
EFFECTIVE LENGTH
1689
mm
GROOVE WIDTH
12.7
mm
EXCAVATOR, UNDERGROUND ART TRUCK,
Compare Prices:
As an associate, we earn commssions on qualifying purchases through the links below
D&D PowerDrive 5S5249 Caterpillar Replacement Belt, Rubber, 66.27" Length
D&D PowerDrive Belt 17.53 x 66.27in OC || Material type- rubber || Manufactured by D&D PowerDrive || Package weight: 1.0 lbs
D&D PowerDrive Belt 17.53 x 66.27in OC || Material type- rubber || Manufactured by D&D PowerDrive || Package weight: 1.0 lbs
CTP 5S5249 External Engine V-Belt, 1/2" Size, 66.5" Length
CTP For External engine || 1/2" Size || 66.5" Length
CTP For External engine || 1/2" Size || 66.5" Length
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 5S5249:
Caterpillar parts catalog:
Information:
Use this procedure to troubleshoot excessive oil consumption.Probable Causes
Oil level
Leaks
Worn engine components
Oil viscosity
TurbochargerRecommended Actions
Table 1
Troubleshooting Test Steps Values Results
1. Check the Crankcase for Excessive Oil
A. Check the engine oil level.
Note: Too much oil in the engine crankcase can cause the engine to consume oil.
B. Ensure that the level indicator is calibrated correctly for the installation.
Oil Level
Result: The oil level is correct and the level indicator is correctly calibrated.
Proceed to Test Step 2.
Result: The oil level is high or the level indicator is incorrectly calibrated.
Repair: Remove excessive engine oil from the crankcase.
If the problem is not resolved, proceed to Test Step 2.
2. Check for External Engine Oil Leaks
A. Check for oil leaking on the outside of the engine.
Leaks
Result: There are no oil leaks on the outside of the engine.
Proceed to Test Step 3.
Result: There are oil leaks on the outside of the engine.
Repair: Find the oil leaks. Repair or replace damaged components.
If the problem is not resolved, proceed to Test Step 3.
3. Inspect the Engine for Oil Leaks in the Combustion Area of the Cylinder
A. Inspect the following components for wear:
- Damaged piston
- Worn piston ring
- Worn cylinder liners
- Worn valve guides
- Damaged cylinder head
Damaged or Worn Engine Components
Result: There are no oil leaks in the combustion area of the cylinder.
Proceed to Test Step 4.
Result: There are oil leaks in the combustion area of the cylinder.
Repair: Repair or replace damaged components.
If the problem is not resolved, proceed to Test Step 4.
4. Ensure that the Correct Oil Viscosity is Being Used
Note: Excessive consumption of engine oil can result if engine oil with the wrong viscosity is used. Engine oil with a thin viscosity can be caused by fuel leakage into the crankcase or by increased engine temperature.
Oil Viscosity
Result: The engine oil viscosity is correct.
Proceed to Test Step 5.
Result: The engine oil viscosity is not correct.
Repair: Replace the engine oil.
If the problem is not resolved, proceed to Test Step 5.
5. Check for Proper Operation of the Turbocharger
A. Check for any oil that may be leaking into the air inlet.
Turbocharger
Result: The turbocharger seals are leaking.
Repair: Repair or replace the turbocharger.
Verify that the repair eliminated the problem.
If the procedure did not correct the issue, contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).
Oil level
Leaks
Worn engine components
Oil viscosity
TurbochargerRecommended Actions
Table 1
Troubleshooting Test Steps Values Results
1. Check the Crankcase for Excessive Oil
A. Check the engine oil level.
Note: Too much oil in the engine crankcase can cause the engine to consume oil.
B. Ensure that the level indicator is calibrated correctly for the installation.
Oil Level
Result: The oil level is correct and the level indicator is correctly calibrated.
Proceed to Test Step 2.
Result: The oil level is high or the level indicator is incorrectly calibrated.
Repair: Remove excessive engine oil from the crankcase.
If the problem is not resolved, proceed to Test Step 2.
2. Check for External Engine Oil Leaks
A. Check for oil leaking on the outside of the engine.
Leaks
Result: There are no oil leaks on the outside of the engine.
Proceed to Test Step 3.
Result: There are oil leaks on the outside of the engine.
Repair: Find the oil leaks. Repair or replace damaged components.
If the problem is not resolved, proceed to Test Step 3.
3. Inspect the Engine for Oil Leaks in the Combustion Area of the Cylinder
A. Inspect the following components for wear:
- Damaged piston
- Worn piston ring
- Worn cylinder liners
- Worn valve guides
- Damaged cylinder head
Damaged or Worn Engine Components
Result: There are no oil leaks in the combustion area of the cylinder.
Proceed to Test Step 4.
Result: There are oil leaks in the combustion area of the cylinder.
Repair: Repair or replace damaged components.
If the problem is not resolved, proceed to Test Step 4.
4. Ensure that the Correct Oil Viscosity is Being Used
Note: Excessive consumption of engine oil can result if engine oil with the wrong viscosity is used. Engine oil with a thin viscosity can be caused by fuel leakage into the crankcase or by increased engine temperature.
Oil Viscosity
Result: The engine oil viscosity is correct.
Proceed to Test Step 5.
Result: The engine oil viscosity is not correct.
Repair: Replace the engine oil.
If the problem is not resolved, proceed to Test Step 5.
5. Check for Proper Operation of the Turbocharger
A. Check for any oil that may be leaking into the air inlet.
Turbocharger
Result: The turbocharger seals are leaking.
Repair: Repair or replace the turbocharger.
Verify that the repair eliminated the problem.
If the procedure did not correct the issue, contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).
Parts vee Caterpillar catalog:
12E, 594, 955H, 955K, D9G
9S9010
VEE BELT
594, D9G
594, D9G
D10R, D4H, D4HTSK II, D7R II, D9G, D9H
D9G, D9H
12E, 955H, D9G, D9H
916, D9G
941, 950, D4D
941, 951B, 955K, 955L, D4D
7S9811
VEE BELT SET
951B, 955K
951B, 955K
518, 951B, 955H, 955K
7S9858
VEE BELT SET
941, D4D
941, D4D
941, 950, D4D
950, D8K
941, 950, D4D
772, 910
9S9010
VEE BELT
594, D9G
594, D9G