5S9078 VEE BELT SET Caterpillar parts
12F, 14E, D8K
Rating:
Alternative (cross code) number:
CA5S9078
5S-9078
5S9078
CA5S9078
5S-9078
5S9078
Weight: 1 pounds 0 kg.
MOTOR GRADER, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 5S9078 External Engine V-Belt, 3/4" Size, 68" Length, Pack of 2
CTP For External engine || 3/4" Size || 68" Length || Pack of 2
CTP For External engine || 3/4" Size || 68" Length || Pack of 2
5S9078 Replacement Belt for Caterpillar Drive Belt
GIVLETICS -✅ RELIABLE PERFORMANCE: 5S9078 replacement belts are versatile. USA-made for quality and longevity. || -✅ Do not let your machinery come to a stop because of a belt that has become worn out. Repair your worn-out belt with our High-Performance Belt. Its high resistance to wear and strain makes it last longer and work better. || -✅ DURABLE MATERIAL: Made of durable, high-quality fabrics. Perfect for harsh settings and heavy-duty uses. || -✅ EASY TO USE: Drive belt is easy to install and maintain, with a unique feature that ensures proper alignment and tension. || -✅ The 5S9078 belt is the most reliable and efficient. This belt transmits power smoothly and efficiently due to its careful construction and resistance to wear and tear, making it an ideal substitute for a damaged belt.
GIVLETICS -✅ RELIABLE PERFORMANCE: 5S9078 replacement belts are versatile. USA-made for quality and longevity. || -✅ Do not let your machinery come to a stop because of a belt that has become worn out. Repair your worn-out belt with our High-Performance Belt. Its high resistance to wear and strain makes it last longer and work better. || -✅ DURABLE MATERIAL: Made of durable, high-quality fabrics. Perfect for harsh settings and heavy-duty uses. || -✅ EASY TO USE: Drive belt is easy to install and maintain, with a unique feature that ensures proper alignment and tension. || -✅ The 5S9078 belt is the most reliable and efficient. This belt transmits power smoothly and efficiently due to its careful construction and resistance to wear and tear, making it an ideal substitute for a damaged belt.
Number on catalog scheme:
7
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 395-1099 Lifting Eye Assembly 1
B 207-1601 Rubber Lubricant -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Personal injury or death can occur from not following the proper procedure or the recommended tooling.To prevent the possibility of injury or death, follow the established procedure using the recommended tooling.
Illustration 1 g06321938
Remove bolts (1).
Disconnect harness assembly (2).
Illustration 2 g06321940
Remove cable straps (3) and position sensors (4).
Illustration 3 g06321964
Remove bolts (5).
Remove bolts (6) and strap (7).
Illustration 4 g06321974
Loosen bolts (8) and clamp (9).
Illustration 5 g06322006
Remove nuts (12) and bolts (13).
Use a suitable lifting device with Tooling (A) and remove air shutoff group (11) with air pipe (10). The combined weight of air pipe (10) and air shutoff group (11) is approximately 23 kg (51 lb).
Illustration 6 g06322016
Remove bolts (19) with bracket (17).
Remove bolts (15) with clips (16).
Separate air shut off valve assembly (18) and air inlet elbow (14).Installation Procedure
Illustration 7 g06322016
Position air inlet elbow (14) with air shut off valve assembly (18).
Install bolts (15) with clips (16), bolt (20) with bracket (17), and bolt (19) finger tight. Align bolted joints to reduce assembly preload.Note: Tighten bolts (15), (19), and (20) in the following sequence.
Tighten bolts (19).
Tighten bolts (20) with bracket (17).
Tighten bolts (15) and clips (16). Orient grommet with the cut inside the open area of clip (16).
Illustration 8 g06322006
Lubricate O-ring seals on air pipe (10) with Tooling B and install in air shutoff group (11).
Use a suitable lifting device with Tooling (A) and install air shutoff group (11) with air pipe (10). The combined weight of air pipe (10) and air shutoff group (11) is approximately 23 kg (51 lb).
Tighten nuts (12) and bolts (13) to a torque of 35 5 N m (26 4 lb ft).
Illustration 9 g06321974
Tighten bolts (8) to a torque of 40 2 N m (30 1 lb ft).
Tighten clamp (9).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 395-1099 Lifting Eye Assembly 1
B 207-1601 Rubber Lubricant -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Personal injury or death can occur from not following the proper procedure or the recommended tooling.To prevent the possibility of injury or death, follow the established procedure using the recommended tooling.
Illustration 1 g06321938
Remove bolts (1).
Disconnect harness assembly (2).
Illustration 2 g06321940
Remove cable straps (3) and position sensors (4).
Illustration 3 g06321964
Remove bolts (5).
Remove bolts (6) and strap (7).
Illustration 4 g06321974
Loosen bolts (8) and clamp (9).
Illustration 5 g06322006
Remove nuts (12) and bolts (13).
Use a suitable lifting device with Tooling (A) and remove air shutoff group (11) with air pipe (10). The combined weight of air pipe (10) and air shutoff group (11) is approximately 23 kg (51 lb).
Illustration 6 g06322016
Remove bolts (19) with bracket (17).
Remove bolts (15) with clips (16).
Separate air shut off valve assembly (18) and air inlet elbow (14).Installation Procedure
Illustration 7 g06322016
Position air inlet elbow (14) with air shut off valve assembly (18).
Install bolts (15) with clips (16), bolt (20) with bracket (17), and bolt (19) finger tight. Align bolted joints to reduce assembly preload.Note: Tighten bolts (15), (19), and (20) in the following sequence.
Tighten bolts (19).
Tighten bolts (20) with bracket (17).
Tighten bolts (15) and clips (16). Orient grommet with the cut inside the open area of clip (16).
Illustration 8 g06322006
Lubricate O-ring seals on air pipe (10) with Tooling B and install in air shutoff group (11).
Use a suitable lifting device with Tooling (A) and install air shutoff group (11) with air pipe (10). The combined weight of air pipe (10) and air shutoff group (11) is approximately 23 kg (51 lb).
Tighten nuts (12) and bolts (13) to a torque of 35 5 N m (26 4 lb ft).
Illustration 9 g06321974
Tighten bolts (8) to a torque of 40 2 N m (30 1 lb ft).
Tighten clamp (9).
Caterpillar parts catalog:
Parts vee Caterpillar catalog:
120, 12F, 140, 14E, 627, 920, D6C
12F, 140, 14E, 950, 977K, 980B, D6C
950, D8K
14E, D6C
12F, 955H
12E, 955H, D9G, D9H
631C, 983
651, 943
D8K
16G, 539, 950, 983, D10R
977H
7M5973
VEE BELT SET
561B, D8H
561B, D8H
12F, 955H
955H
613, 613B, 613C, 621B, 776, 777, 983B, D10N, D10R, D10T, D350E, D350E II, D400E, D400E II, D40D, R1600H, R1700G
769D, 771D, 773E, 966G, 972G, 983B