7N3157 VEE BELT SET Caterpillar parts
D348
Rating:
Alternative (cross code) number:
CA7N3157
7N-3157
7N3157
CA7N3157
7N-3157
7N3157
Weight: 0.50 pounds 0 kg.
VEHICULAR ENGINE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
D&D PowerDrive 7N3157 Caterpillar Replacement Belt, Rubber
D&D PowerDrive Belt 15.44 x 51.07in OC || Material type is rubber || Made in china || Package weight: 1.0 lbs
D&D PowerDrive Belt 15.44 x 51.07in OC || Material type is rubber || Made in china || Package weight: 1.0 lbs
$8.43
24 Jul 2021
1.0[0.45] Pounds
Amazon.com
D&D PowerDrive 7N3157 Caterpillar Replacement Belt, Rubber
D&D PowerDrive Belt 15.44 x 51.07in OC || Material type is rubber || Made in china || Package weight: 1.0 lbs
D&D PowerDrive Belt 15.44 x 51.07in OC || Material type is rubber || Made in china || Package weight: 1.0 lbs
Number on catalog scheme:
6
For full view, you need register
Compatible equipment models: 7N3157:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-8250 Strap Wrench 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Illustration 1 g00545970
Typical example
If the bracket for the fuel filter mounting was removed, reinstall the bracket.
Place bracket (7) for the fuel filter in position on the engine.
Install the washers, and bolts (6).
Illustration 2 g00555612
3408E Engine
Typical example
Illustration 3 g00555613
3412E Engine
Typical example
If the mounting stud or studs were removed from fuel filter base (4), reinstall the stud or studs.
Apply 9S-3263 Thread Lock Compound on the tapered end of the studs to a distance of 7.6 mm (0.30 inch).
Install the studs in fuel filter base (4).
Tighten the studs to a torque of 70 15 N m (52 11 lb ft).
Install fuel filter base (4) in position on the engine, and install two washers, nuts, and bolts (3) in order to hold the fuel filter base.
Connect fuel lines (1) and (5) to the fuel filter base.
Install new fuel filters (2) on the fuel filter base with Tool (A). Follow the instructions with the fuel filter for the correct installation procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-8250 Strap Wrench 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Illustration 1 g00545970
Typical example
If the bracket for the fuel filter mounting was removed, reinstall the bracket.
Place bracket (7) for the fuel filter in position on the engine.
Install the washers, and bolts (6).
Illustration 2 g00555612
3408E Engine
Typical example
Illustration 3 g00555613
3412E Engine
Typical example
If the mounting stud or studs were removed from fuel filter base (4), reinstall the stud or studs.
Apply 9S-3263 Thread Lock Compound on the tapered end of the studs to a distance of 7.6 mm (0.30 inch).
Install the studs in fuel filter base (4).
Tighten the studs to a torque of 70 15 N m (52 11 lb ft).
Install fuel filter base (4) in position on the engine, and install two washers, nuts, and bolts (3) in order to hold the fuel filter base.
Connect fuel lines (1) and (5) to the fuel filter base.
Install new fuel filters (2) on the fuel filter base with Tool (A). Follow the instructions with the fuel filter for the correct installation procedure.
Caterpillar parts catalog:
Parts vee Caterpillar catalog:
D348, D349
D348
D353C
D346
3N0860
VEE BELT
D346
D346
D343, D35HP, D400
D348
6L1986
VEE BELT SET
D342
D342
D320A
315, 315B, 317B LN, 318B, 906, 908, 933, 939, D320A, D3C III, D4C III, D5C III, RM-250C, RR-250, RR-250B, SS-250
D343
D343
D343